Need help asap
#1
Junior Member
Thread Starter
Join Date: Mar 2004
Location: N.E. Philly Pa
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 formula
Engine: 305 tbi
Transmission: 700R4
Need help no more
got it figured out -
I am working on trans as I speak
I did the mod on the valve for 4th gear at wot from here
http://web.telia.com/~u60113744/tran...tranny_wot.htm
my question
I took car for test drive and it would not shift out of 1st
I was wondering - when I put the valve in, there is about 1/2 inch of play before the spring is depressed - is this normal or does it need to be in constant pressure
thanks in advance
I am working on trans as I speak
I did the mod on the valve for 4th gear at wot from here
http://web.telia.com/~u60113744/tran...tranny_wot.htm
my question
I took car for test drive and it would not shift out of 1st
I was wondering - when I put the valve in, there is about 1/2 inch of play before the spring is depressed - is this normal or does it need to be in constant pressure
thanks in advance
Last edited by Driveshaft; 02-08-2005 at 06:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post