T-5 bolt sizes
Thread Starter
Supreme Member
iTrader: (2)
Joined: Nov 2001
Posts: 1,602
Likes: 0
From: Lakewood, CO
Car: 1994 Jeep Wrangler
T-5 bolt sizes
Anybody know what the specs are on the Tranny to bell housing bolts for a WC T-5? I figure I can just go to ACE and pick up some Grade 8 bolts once i know the corect length width and thread size. Thanks
Joined: Jul 2000
Posts: 6,521
Likes: 91
From: Aridzona
Car: `86 SS / `87 SS
Engine: L69 w/ TPI on top / 305 4bbl
Transmission: `95 T56 \ `88 200-4R
They're M10x1.5 more than likely. About 45mm of thread.
Should have left the trans. on the floor and taken the bellhousing to the hardware store.
Personally I like the GM bolts. Run them in with the Torx45 for clearance issues and then tighten with a 15mm socket.
Should have left the trans. on the floor and taken the bellhousing to the hardware store.
Personally I like the GM bolts. Run them in with the Torx45 for clearance issues and then tighten with a 15mm socket.
Thread
Thread Starter
Forum
Replies
Last Post
toronto formula
Engine/Drivetrain/Suspension Parts for Sale
15
Nov 10, 2015 06:17 AM
gixxer92
Engine/Drivetrain/Suspension Parts for Sale
5
Sep 1, 2015 04:32 PM
knight72
Engine/Drivetrain/Suspension Wanted
0
Aug 10, 2015 09:32 PM