TH350 fluid capacity?
Thread Starter
Senior Member
Joined: Mar 2003
Posts: 523
Likes: 0
From: Marion, Iowa
Car: 92 Camaro
Engine: ZZ4 Crate Engine w/Hot Cam
Transmission: Rebuilt 700R4 with Transgo and MW 3
Axle/Gears: 3.73 Eaton Posi
TH350 fluid capacity?
I just rebuilt a TH350C from an 85 van. We took the conveter out and dumped out as much old fluid as we could get out.
Does anyone know how much fluid the TH350s take? Should you fill it half way and then start the engine for 20seconds first, or just put it all in?
I can't find the capacity of these trannies listed anywhere. Thanks
Does anyone know how much fluid the TH350s take? Should you fill it half way and then start the engine for 20seconds first, or just put it all in?
I can't find the capacity of these trannies listed anywhere. Thanks
Supreme Member
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
THey hold somewhere around 11 quarts, starting out dry.
If you're using a used converter, it'll probably take about 9 to fill it.
Put about 5 quarts in it before you start it; add 2 more as soon as you start it up; check it, fill up to Full, and top it off after driving it around.
If you're using a used converter, it'll probably take about 9 to fill it.
Put about 5 quarts in it before you start it; add 2 more as soon as you start it up; check it, fill up to Full, and top it off after driving it around.
Thread
Thread Starter
Forum
Replies
Last Post
HoosierinWA
Tech / General Engine
5
Oct 7, 2015 10:15 AM
