I had a B&M megashifter installed about 3 months ago and its very stiff when going from Park to Reverse. The guy said it would get easier over time but still it seems the same. Every thing else works fine. I have a brand new tranny and shifter cable so I know that cant be it. Any help would be greatly appreciated.............
Supreme Member
xpndbl3
Supreme Member
close
May 26, 2024
mine's still stiff after 3 years.
Member
Ive had mine for a year and it is still stiff also!!
Supreme Member
You should call a Dr. if it has been "stiff" for that long. 
Supreme Member
Back when I still had my 700R4, my megashifter was stiff coming out of part for like 3 years. I adjusted the cable and shifter some, it helped a little. I got used to it and had no problem with it, I could pull it out of park like nothing. My 100lb Fiancee could barely get it out of park with both hands!
Member
ryn28
Member
close
May 30, 2016
Guys, you have to use the search feature and look through the results. If you find my name in every one of these posts you'll see I kept posting the same thing over and over. To this day I have the recommendation I mention in these posts and have no problems at all:
Code:
https://www.thirdgen.org/forums/auto-detailing-appearance/178961-b-m-shifter-results.html
Code:
https://www.thirdgen.org/forums/body-interior/102745-b-m-megashifter-replacement.html
Code:
https://www.thirdgen.org/forums/body-interior/76457-b-m-mega-shifter.html
Code:
https://www.thirdgen.org/forums/aftermarket-product-review/1474-b-m-megashifter.html
Code:
https://www.thirdgen.org/forums/aftermarket-product-review/484-b-m-megashifter-need.html
Tags 700r4, adjust, bm, cable, correct, iroc, mega, megashift, megashifter, megashofter, mgashifter, shifter, stiff, stiffness