need help installing B&M converter lockup control
Thread Starter
Supreme Member
Joined: Dec 2001
Posts: 1,854
Likes: 0
From: boonton, NJ
Car: 84 camaro Z28
Engine: 434sbc
Transmission: powerglide
Axle/Gears: moser 9" with 411 posi
need help installing B&M converter lockup control
the kit that im using is this one http://www.jegs.com/webapp/wcs/store...48070_-1_10733
the kit that i ordered is 130-70244. the one that i recieved is the one pictured for part #130-70248 on the jegs website. i dont know if maybe one of the pics on the site is old or something.
ok now for my problem. there are two plug in connectors at the bottom of the controll unit. there is a three wire and a two wire plug in connectors. the three wire one is ok. there is no problem with that one. the two wire one is were the problem is. it is for the two wires that come off the supplied vehicle speed sensor. the problem is that those two wires coming off the VSS dont have the male end of the connector on it. and there is nothing in the kit for a connector. i dont know what to do. it would be a pretty small connector so i dont think i would be able to get it from the local parts store. i figured that i would ask on here first. otherwise ill have to wait until monday to call b7m tech line. thanks for any help.
here are two pics that should help out alittle.
http://s54.photobucket.com/albums/g1...al&media=image
the kit that i ordered is 130-70244. the one that i recieved is the one pictured for part #130-70248 on the jegs website. i dont know if maybe one of the pics on the site is old or something.
ok now for my problem. there are two plug in connectors at the bottom of the controll unit. there is a three wire and a two wire plug in connectors. the three wire one is ok. there is no problem with that one. the two wire one is were the problem is. it is for the two wires that come off the supplied vehicle speed sensor. the problem is that those two wires coming off the VSS dont have the male end of the connector on it. and there is nothing in the kit for a connector. i dont know what to do. it would be a pretty small connector so i dont think i would be able to get it from the local parts store. i figured that i would ask on here first. otherwise ill have to wait until monday to call b7m tech line. thanks for any help.
here are two pics that should help out alittle.
http://s54.photobucket.com/albums/g1...al&media=image
Thread
Thread Starter
Forum
Replies
Last Post
The_Phoenix
Interior Parts for Sale
12
Feb 4, 2016 07:10 AM
1992rs/ss
Engine/Drivetrain/Suspension Parts for Sale
16
Jan 28, 2016 09:58 PM
toronto formula
Engine/Drivetrain/Suspension Parts for Sale
15
Nov 10, 2015 06:17 AM





