These are pics of a Viper t56 input shaft. I found a place to buy the adapter plate which is .5" thick to bolt a t56 up to a t5 bell housing. What I need are pictures like the ones below of a t5 input shaft. If you can't give me pictures, what is the distance from:
1. The face of the tranny where it meets the bellhousing to the end of the input shaft.
2. The face of the tranny where it meets the bellhousing to the beginning of the splines.
3. The length of the splines.

<img>http://www.geocities.com/camarodan2001/T-56-1.jpg</img

<img>http://www.geocities.com/camarodan2001/T-56-2.jpg</img

 

Sorry the pics are here.

<img>http://www.geocities.com/camarodan2001/T56-1.jpg</img

<img>http://www.geocities.com/camarodan2001/T56-2.jpg</img

 

Just copy and paste the two addresses into a new browser to see the pics. I can't get them to show up.
http://www.geocities.com/camarodan2001/T56-1.jpg
http://www.geocities.com/camarodan2001/T56-2.jpg