Tranny Gear Ratios
#1
Junior Member
Thread Starter
Join Date: Jan 2001
Location: Jonesboro, AR USA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Tranny Gear Ratios
Can Someone PLEASE tell me the gear ratios of the THM200 and/or the THM200C? Also, I would like to know what cars GM put the transmissions in. Thanks in advance. Any information will be much appreciated.
------------------
1983 Z28 LG4 bored .040 over(312 c.i.) with flat tops and 9.7:1 comp.
Edelbrock 600 cfm with manual choke
FlowTech headers with 1 5/8 primaries.
Future plans: Upgrade the ignition system.
------------------
1983 Z28 LG4 bored .040 over(312 c.i.) with flat tops and 9.7:1 comp.
Edelbrock 600 cfm with manual choke
FlowTech headers with 1 5/8 primaries.
Future plans: Upgrade the ignition system.
#2
Moderator
Join Date: Jan 2000
Location: Mercedes Norte, Heredia, Costa Rica
Posts: 20,981
Likes: 0
Received 9 Likes
on
8 Posts
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
1st: 2.74
2nd: 1.57
3rd: 1.00
200C is the same as the 200, but with a locking torque-converter.
[This message has been edited by Apeiron (edited March 28, 2001).]
2nd: 1.57
3rd: 1.00
200C is the same as the 200, but with a locking torque-converter.
[This message has been edited by Apeiron (edited March 28, 2001).]
#3
Junior Member
Thread Starter
Join Date: Jan 2001
Location: Jonesboro, AR USA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Is there anyway to tell the difference between the 200 and 200C by looking?
------------------
1983 Z28 LG4 bored .040 over(312 c.i.) with flat tops and 9.7:1 comp.
Edelbrock 600 cfm with manual choke
FlowTech headers with 1 5/8 primaries.
Future plans: Upgrade the ignition system.
------------------
1983 Z28 LG4 bored .040 over(312 c.i.) with flat tops and 9.7:1 comp.
Edelbrock 600 cfm with manual choke
FlowTech headers with 1 5/8 primaries.
Future plans: Upgrade the ignition system.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
UltRoadWarrior9
Transmissions and Drivetrain
3
09-02-2015 08:24 PM