I have an 84 Camaro with a 700R4 that has about 74,000 miles on it. It used to shift real good - nice and firm. Since the torque converter installation, it shifts really softly. So I ordered a Transgo shift kit. Will installing this shift kit hurt my trans in any way? By the way, I do have the B&M trans cooler. ANY help would be greatly appr eciated. Thanks.

------------------
1984 Camaro Sport Coupe - 73K Miles, Rebuilt 355 TPI L98, Crane 2032 CompuCam - 214/220 @ .050", Crane adjustable fuel pressure regulator, MSD Blaster coil, custom burned PROM, stock TPI intake, Accel 24# injectors, gutted air box with K&N filters
F41 Suspension Package, 700R4 Tranny, TCI Breakaway torque converter, 3.27 Disc Brake Posi Rear
Hooker Shorty Headers, Catco High-Flow 3" Cat, Flowmaster 3" American Thunder Cat-Back
New Paint
Best 1/4 Mile Run (with old LG4 motor):
16.760 @ 80.74 MPH

Coming Soon:
Aluminum Drive Shaft

 

The Trans-Go Performance Shift kit when installed correctly will help the shifts and the life expectancy of the transmission under hard driving. Make sure it has the boost (2) valves & Corvette servo. The TV cable adjustment could be the reason why you are having soft shifts. Look at transfixleos earlier posts on this board on how to adjust the TV cable correctly!
Hope This Helps!!!