4th Gen Tranny in ThirdGen?
Thread Starter
Member
Joined: Jan 2001
Posts: 380
Likes: 0
From: Hotter'n Heck, Ar
4th Gen Tranny in ThirdGen?
My NWC T5 died in my 2.8 and I was curious if a 5 speed from a 4th Gen 3.4L (both 60* V6) would work.
The person I talked to said that it would not bolt up because the tranny is at a different angle than in 3rdGens. I find this tough to believe.
He also said something about the 4thGens using a different type of speedo pickup.
Any thoughts on whether or not it would work? I would like to get a newer one with less miles if I can.
Thanks!
Dale
------------------
1986 FireBird V6
The person I talked to said that it would not bolt up because the tranny is at a different angle than in 3rdGens. I find this tough to believe.
He also said something about the 4thGens using a different type of speedo pickup.
Any thoughts on whether or not it would work? I would like to get a newer one with less miles if I can.
Thanks!
Dale
------------------
1986 FireBird V6
Joined: Jul 1999
Posts: 10,950
Likes: 26
From: Orange, SoCal
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
I know the speedo pickup is different, but I dont know that much about V6 T5's... Sorry. You might try the V6 forum over at camaroz28.com, see if they know.
------------------
1991 Camaro Z28
5.7L 5-Speed (originally 305)
317 RWHP, 418 RWTQ
13.23 @ 107.62 MPH (2.10 60')
Southern California
Member: SoCal 3rd Gen F-Bodies
Member: SoCal F-Bodies
-=ICON Motorsports=-
------------------
1991 Camaro Z28
5.7L 5-Speed (originally 305)
317 RWHP, 418 RWTQ
13.23 @ 107.62 MPH (2.10 60')
Southern California
Member: SoCal 3rd Gen F-Bodies
Member: SoCal F-Bodies
-=ICON Motorsports=-
Thread
Thread Starter
Forum
Replies
Last Post
Zachattack0925
Transmissions and Drivetrain
4
Aug 12, 2015 09:52 PM