Im doing the t56 conversion and i must be done within a week so all parts will be ordered tonight. I already have the tranmission, bellhousing, and the shifter. Now i need the custom crossmember. Where is the best place to get one? Also i seen this one on ebay:



http://cgi.ebay.com/ebaymotors/1982-...item27aeb70c8d

I have long tube headers. Will this accomadate them? Also whats the purpose of the "driveshaft safety loop?? is it somthing i need? and do i need a new "tourqe arm"? Please just answer my questions. Ive read the threads multiple times and im just begging for a straight answer.. please. thanks

 

you need the flywheel and pressure plate,what year is you car 90-92 camaro require the dakota digital box to run the speedometer,i did not need a new torque arm in my 91,don't know for sure on headers
luke

 

thanks for the response! i know i need the flywheel ect, im buying those locally. I just have to order the parts i cant buy locally tonight such as the custom crossmember and ect.

also through gmpartsdirect.com, i can get the complete clutch hydraulic assembly and clutch release fork for $224. Is that a bad deal?

 

i paid way more than that for the hydralics but then again canada is always more pricey

 

Alrighty Ill go ahead and place the order. Does the fork just sit over the throw out bearing or how does it attach? I just want to make sure i have all the bolts and such.

 

Here's a thread I started that should have everything you're looking for. I swear that thread should be a sticky considering how many times I've had to link people to it! BTW, the hawks crossmember is for the T56/longtubes combo. it'll require modification if you have inner SFC's though.

https://www.thirdgen.org/forums/tran...-overview.html