e bay stall convertor
#1
Member
Thread Starter
iTrader: (20)
Join Date: May 2004
Location: vero beach, Fl.
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88gta
Engine: 357
Transmission: 700r4/3000 stall convertor
Axle/Gears: 9 bolt 3.27
e bay stall convertor
interested if anybody has ever used this convertor before
http://cgi.ebay.com/ebaymotors/700R4...Q5fAccessories
I was putting it on a 350hp motor and didnt really have the extra cash for a tci.. after I had to my tranny rebuilt....thanks
http://cgi.ebay.com/ebaymotors/700R4...Q5fAccessories
I was putting it on a 350hp motor and didnt really have the extra cash for a tci.. after I had to my tranny rebuilt....thanks
#2
Supreme Member
iTrader: (5)
Join Date: Jan 2009
Location: league city
Posts: 2,928
Likes: 0
Received 3 Likes
on
3 Posts
Car: SOLD!!!!!
Re: e bay stall convertor
imho save the money. unless someone has used it and tested it i would not do it. there are other brands besides tci that you could get. remember that if you get a cheap or unproved converter that goes ouyt it can destroy much more.
#3
Member
Thread Starter
iTrader: (20)
Join Date: May 2004
Location: vero beach, Fl.
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88gta
Engine: 357
Transmission: 700r4/3000 stall convertor
Axle/Gears: 9 bolt 3.27
Re: e bay stall convertor
well I need a cheaper one for now till I get back on my feet..any good ones that are going to preform decent?
#4
Supreme Member
iTrader: (2)
Join Date: Jul 2009
Location: morrow, ga
Posts: 1,354
Likes: 0
Received 4 Likes
on
4 Posts
Car: 82 S10, 83 280ZX, 84 Z28
Engine: 355 smallblocks..na, 2.8 turbo
Transmission: 85:th350, 84:700R4
Axle/Gears: 85:ford9 4.85, 84:stock 3.24
Re: e bay stall convertor
i bought one from re d neck performance on ebay. ive made nearly 100 passes on it and still going.
#6
Junior Member
Join Date: Jun 2009
Location: Channelview,Tx
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Chevy Short Wide
Engine: 383 Vortec TBI
Transmission: 700r4
Axle/Gears: 3.73
Re: e bay stall convertor
interested if anybody has ever used this convertor before
http://cgi.ebay.com/ebaymotors/700R4...Q5fAccessories
I was putting it on a 350hp motor and didnt really have the extra cash for a tci.. after I had to my tranny rebuilt....thanks
http://cgi.ebay.com/ebaymotors/700R4...Q5fAccessories
I was putting it on a 350hp motor and didnt really have the extra cash for a tci.. after I had to my tranny rebuilt....thanks
#7
Member
Thread Starter
iTrader: (20)
Join Date: May 2004
Location: vero beach, Fl.
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88gta
Engine: 357
Transmission: 700r4/3000 stall convertor
Axle/Gears: 9 bolt 3.27
Re: e bay stall convertor
I searched all the other forums and seen people buy them but only one person ever posted anything about them getting it in and driving..he liked it but it was on a stock lt1...anyone ever use one of these??
Trending Topics
#8
Member
Join Date: Mar 2010
Location: Southern Oregon
Posts: 117
Likes: 0
Received 1 Like
on
1 Post
Car: '91 RS, '72 Pro/Street Z28
Engine: 305 TBI, Blown 468ci w/NOS
Transmission: 5 Spd, 2 Spd Powerglide
Axle/Gears: 3.08, 4.88
Re: e bay stall convertor
After hearing "skirtland1980" say he's made nearly 100 passes on a red neck converter, I would probably go with one those instead.
#10
Member
Thread Starter
iTrader: (20)
Join Date: May 2004
Location: vero beach, Fl.
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88gta
Engine: 357
Transmission: 700r4/3000 stall convertor
Axle/Gears: 9 bolt 3.27
Re: e bay stall convertor
I can't speak for that specific company,......but whatever you do, absolutely DO NOT buy one of those ACC converters they sell on ebay. (Formerly known as Alabama Converter) They're JUNK and will not last.
After hearing "skirtland1980" say he's made nearly 100 passes on a red neck converter, I would probably go with one those instead.
After hearing "skirtland1980" say he's made nearly 100 passes on a red neck converter, I would probably go with one those instead.
#12
Junior Member
Join Date: Jun 2009
Location: Channelview,Tx
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Chevy Short Wide
Engine: 383 Vortec TBI
Transmission: 700r4
Axle/Gears: 3.73
#14
Member
Thread Starter
iTrader: (20)
Join Date: May 2004
Location: vero beach, Fl.
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88gta
Engine: 357
Transmission: 700r4/3000 stall convertor
Axle/Gears: 9 bolt 3.27
Re: e bay stall convertor
Update.....convertor is now in....$354 shipped to the door in about a week..and I must say it works great
#15
Member
Join Date: Oct 2006
Location: Houston, TX
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 iroc
Engine: 350 .060 AFR HSR XFI280
Transmission: transgo 700r4
Axle/Gears: 3.73
Re: e bay stall convertor
what stall did you get? and what brand? was it the rev max one? and how much power are you putting? I need to order one with a 3600 stall and if it's a decent converter for the price it aint bad at all.
#16
Member
Thread Starter
iTrader: (20)
Join Date: May 2004
Location: vero beach, Fl.
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88gta
Engine: 357
Transmission: 700r4/3000 stall convertor
Axle/Gears: 9 bolt 3.27
Re: e bay stall convertor
I got the 2800-3000 stall...pushing 350 horse 355..I have had it in now for a couple months,been driving it almost every day on short trips..
#17
Member
iTrader: (1)
Join Date: Nov 2003
Location: TX
Posts: 412
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Firebird SE
Engine: 388 sbc, Brodix Track 1s
Transmission: turbo 350 transmission
Axle/Gears: 4.10 gears
Re: e bay stall convertor
I just bought the 4500 red neck converter and have used them in the past, but only the 3500 stall converter. I have used them with nitrous and have had no problems. I admit that I am using their converters with a t-350 and the motor pumping around 500 hp w/o nos.
Last edited by mcbchild; 07-28-2010 at 03:49 PM. Reason: spelling
#21
Member
Join Date: Oct 2006
Location: Houston, TX
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 iroc
Engine: 350 .060 AFR HSR XFI280
Transmission: transgo 700r4
Axle/Gears: 3.73
Re: e bay stall convertor
ok, I ended up getting the rev max 3600 with updated carbon fiber clutch, made about 10-15 passes at the track and some street action and haven't had problems so far, I paid $275 shipped plus upgrade extra $40. I say, if you're in a budget go for it, if you got the money go precision industries.
#22
Member
Thread Starter
iTrader: (20)
Join Date: May 2004
Location: vero beach, Fl.
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88gta
Engine: 357
Transmission: 700r4/3000 stall convertor
Axle/Gears: 9 bolt 3.27
Re: e bay stall convertor
glad to see someone making a decent convertor for these 700r4's without paying over $500...update on mine..I drive it every day now, I have been on and off the highway, I have had no issues with it...
Thread
Thread Starter
Forum
Replies
Last Post
darwinprice
Organized Drag Racing and Autocross
17
10-11-2015 11:51 PM
HoosierinWA
Tech / General Engine
5
10-07-2015 10:15 AM