my new 700r4 will not hold a gear it always shifts at a certain rpm wen i put it in first and do a burn out it will go right through da gears........how can i get it 2 stop with out buying a kit 4 it????????????????????????????

 

All "stock" 700R4's will come out 1st gear if held past governor shift point. To fix this you will need the TransGo Performance Shift kit (700-2-3). I carry the modified version of this Shift kit. This kit will allow you to hold 1st gear to any rpm, until you move the shift lever.

 

it has a strip shift kit already what else is there

 

You don't have the Shift kit I described. What brand valve body kit do you have?

 

like i said its in a v8 s10 i bought it has a 700r4 when it shifts into gears it shifts hard!!!!!!!!!! TCI Auto 376600 - TCI 2004R/700R4 Lock-Up Wiring Kits

http://www.summitracing.com/parts/TCI-376600/

is this what i need 2 hold the gears

 

No, this is for the lockup only. If you have the TCI valve body kit, it will hit hard on the 1-2 shift (this is not what you want, you need to tone it down), but will not hold 1st gear. The TransGo Performance Shift kit is the only one that will do this.

 

I have had the TCI kit in before and hated it. it didn't hold the gears as well and the slam shifting got old very fast.