do my parts match?
Thread Starter
Junior Member
Joined: Jun 2012
Posts: 54
Likes: 0
do my parts match?
All of this is going in a 1983 camaro
chevy 350 pushing 300-350hp
Th350
Maybe a 2500 stall
with a stock posi
2.73 gears.
16 inch tires.
This will be my daily driver. with some use on the track.
chevy 350 pushing 300-350hp
Th350
Maybe a 2500 stall
with a stock posi
2.73 gears.
16 inch tires.
This will be my daily driver. with some use on the track.
Supreme Member
iTrader: (2)
Joined: Jul 2009
Posts: 1,354
Likes: 4
From: morrow, ga
Car: 82 S10, 83 280ZX, 84 Z28
Engine: 355 smallblocks..na, 2.8 turbo
Transmission: 85:th350, 84:700R4
Axle/Gears: 85:ford9 4.85, 84:stock 3.24
Re: do my parts match?
Need some camshaft info.
Thread Starter
Junior Member
Joined: Jun 2012
Posts: 54
Likes: 0
Re: do my parts match?
i am looking at one of these. still trying to determine the best one.
http://m.summitracing.com/parts/cca-k12-234-2
http://m.summitracing.com/parts/cca-k12-208-2
http://m.summitracing.com/parts/cca-k12-234-2
http://m.summitracing.com/parts/cca-k12-208-2
Junior Member
Joined: Sep 2009
Posts: 9
Likes: 0
From: maryland
Car: 87 z28 camaro
Engine: 383cid
Transmission: in the works
Axle/Gears: trying to figure that part out
Re: do my parts match?
The factory stall, and 3.08's will work with either of those two cams. I would still want to change out the 3.08's, but that is personal preference.
Thread Starter
Junior Member
Joined: Jun 2012
Posts: 54
Likes: 0
Re: do my parts match?
I made a mistake it is these two cams.
http://www.summitracing.com/parts/cc...make/chevrolet
http://www.summitracing.com/parts/cc...make/chevrolet
How do i know if i need a stall speed?
http://www.summitracing.com/parts/cc...make/chevrolet
http://www.summitracing.com/parts/cc...make/chevrolet
How do i know if i need a stall speed?
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
Nov 14, 2015 12:02 AM