t-5 slave to hyd tob swap
#1
t-5 slave to hyd tob swap
I want to go with a hyd tob and get rid of the slave cyl. The mc bore on a stock mc is correct. My question is how to hook up the hyd line to stock mc ?
#2
Supreme Member
iTrader: (4)
Re: t-5 slave to hyd tob swap
Russell 640281 lets a female 3AN fit the stock master.
http://www.summitracing.com/parts/rus-640281
http://www.summitracing.com/parts/rus-640281
#4
Member
Join Date: Mar 2001
Location: Beaver Dam, WI
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z
Engine: 350
Transmission: T-5
Re: t-5 slave to hyd tob swap
Maybe this is a dumb question, but can you write up the instructions for doing this?
I was thinking about doing the exact same conversion. Popped too many slave cylinders, and after already bending 1 clutch fork, and it feels like the 2nd one is going, id rather just do this conversion when i replace my tranny.
I was thinking about doing the exact same conversion. Popped too many slave cylinders, and after already bending 1 clutch fork, and it feels like the 2nd one is going, id rather just do this conversion when i replace my tranny.
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Transmissions and Drivetrain
2
08-31-2015 10:47 AM