hey guy I got a 89 tbi 5.0 it has tbi mods 1" tbi spacer and lt1 cam .450/.460 116lsa 1.5 rockers and im about to swap 3.73 gears but for now its the stock 2.73 and I plan to swap 416 heads and better intake but im needs to find out what would be a good stall im just looking for a weekend car its my dd but im sure I wont get too much worse mpg then I already do but I was thinking 2600 stall but idk I never done anything with stall but I want to get the best bang for my buck

 

You can do it with the transmission in but if you’re going to have it outreplace your servo with a Corvette servo. It will help with giving you nice firmshifts and will compliment the new stall nicely.

http://sethirdgen.org/servo.htm

Also,
could you do us a favor and fill this out .It helps us answer some of your questions with out you having to tell us each time you post. This way with just a glance we know what you’re working with.

Simply click on USER CP near the top of the page.

then

EDIT YOUR DETAILS

then fill in the last 4 lines at the bottom of the page.

Car =

Engine =

Transmission =

Axle/Gears =

Thanks

 

well pulling the trans is not all that big of a job but what would I need the servo for im kinda new to doing tranny work and sorry I did not have that stuff filled out I never knew were it was to change it lol sorry Im not great at navigating this site

 

ok I read that link I kinda get it but will I need to change the servo before I do the converter or what sorry I just never messed with a servo before and don't 100% understand it my old votech teacher told me about it before but did not fully understand