Non-WC T5 rebuild thread
Thread Starter
Junior Member
Joined: Dec 2013
Posts: 3
Likes: 0
Non-WC T5 rebuild thread
Hello again!
Maybe this will help people who are considering rebuilding a non-world class T5. I just did the rebuild and documented nearly every step - right up to the point where it gets the RTV sealant and shims added to eliminate the endplay.
Please visit my website where I have thoroughly documented the steps. I rebuilt a 1984 V8 Camaro T5 but did the S10 conversion so I can use it in my pickup with a bench seat. The rebuild is still the same.
I hope you find my documented work useful. NWC Camaro T5 rebuild thread
Jay
Maybe this will help people who are considering rebuilding a non-world class T5. I just did the rebuild and documented nearly every step - right up to the point where it gets the RTV sealant and shims added to eliminate the endplay.
Please visit my website where I have thoroughly documented the steps. I rebuilt a 1984 V8 Camaro T5 but did the S10 conversion so I can use it in my pickup with a bench seat. The rebuild is still the same.
I hope you find my documented work useful. NWC Camaro T5 rebuild thread
Jay
Joined: Aug 1999
Posts: 5,282
Likes: 474
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: Non-WC T5 rebuild thread
Nice work,..... 
I saved the link to my 'favorites' for future reference !
I saved the link to my 'favorites' for future reference !
Thread
Thread Starter
Forum
Replies
Last Post