Transmissions and Drivetrain Need help with your trans? Problems with your axle?

Speedometer/Odometer Not Working.

Thread Tools
 
Search this Thread
 
Old Oct 15, 2017 | 09:13 AM
  #1  
JuanZ28's Avatar
Thread Starter
Junior Member
5 Year Member
Liked
Loved
 
Joined: Aug 2017
Posts: 68
Likes: 1
From: Lake Elsinore CA.
Car: 1987 Camaro Iroc Z28
Engine: 5.7 TPI
Transmission: 700R4
Speedometer/Odometer Not Working.

Can someone help me out. This speedgear is from my 1987 Camaro Iroc Z, 5.7, TPI with a 700R4 transmission. It's a stock car my speedometer stop working and come to find out that somehow the speedgear got strip. Do you guys have a part number and where can I get a replacement. Thanks in advance.


https://www.thirdgen.org/forums/atta...1&d=1508076687
Attached Thumbnails Speedometer/Odometer Not Working.-20171014_181614.jpg  

Last edited by JuanZ28; Oct 15, 2017 at 09:41 AM.
Reply
Old Oct 15, 2017 | 10:26 AM
  #2  
sofakingdom's Avatar
Supreme Member
20 Year Member
Community Builder
iTrader: (1)
 
Joined: Sep 2005
Posts: 27,918
Likes: 2,448
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Speedometer/Odometer Not Working.

https://transmissioncenter.net/?swoo...edometer-gears

Those gears don't generally strip all by themselves; usually they do that because what they're trying to turn, is stuck. Which would of course be the cable.

Might want to pull the speedo cable core out and lube it before it just tears up another gear.
Reply
Old Oct 15, 2017 | 10:41 AM
  #3  
JuanZ28's Avatar
Thread Starter
Junior Member
5 Year Member
Liked
Loved
 
Joined: Aug 2017
Posts: 68
Likes: 1
From: Lake Elsinore CA.
Car: 1987 Camaro Iroc Z28
Engine: 5.7 TPI
Transmission: 700R4
Re: Speedometer/Odometer Not Working.

The Speedo cable core does turns freely. Although I did see like a spring coil twisted up on the input part of the Speedo cable that goes into the speedgear that got strip out. I also had a transmission rebuilt recently and was wondering if they install something wrong or was it normal wear and tear.
Reply
Old Oct 15, 2017 | 02:32 PM
  #4  
JuanZ28's Avatar
Thread Starter
Junior Member
5 Year Member
Liked
Loved
 
Joined: Aug 2017
Posts: 68
Likes: 1
From: Lake Elsinore CA.
Car: 1987 Camaro Iroc Z28
Engine: 5.7 TPI
Transmission: 700R4
Re: Speedometer/Odometer Not Working.

Can anyone tell me if what I got is a 44 tooth speedometer driven gear?
Reply
Old Oct 15, 2017 | 03:35 PM
  #5  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,771
Likes: 1,001
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Speedometer/Odometer Not Working.

What was it before 42 ?
https://www.summitracing.com/search/...on-Type/700R4/
45 ?
https://m.ebay.com/itm/700R4-4L60-TH...257Ciid%253A23

Last edited by Tuned Performance; Oct 15, 2017 at 03:49 PM.
Reply
Old Oct 15, 2017 | 04:13 PM
  #6  
JuanZ28's Avatar
Thread Starter
Junior Member
5 Year Member
Liked
Loved
 
Joined: Aug 2017
Posts: 68
Likes: 1
From: Lake Elsinore CA.
Car: 1987 Camaro Iroc Z28
Engine: 5.7 TPI
Transmission: 700R4
Re: Speedometer/Odometer Not Working.

Thanks. I don't know what it was before but I will remove it again and try to get a tooth count.
Reply
Old Oct 15, 2017 | 04:14 PM
  #7  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,771
Likes: 1,001
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Speedometer/Odometer Not Working.

You can use a calculator based on the drive gear looks like a 17, tire size and rear men’s ratio.
Reply
Old Oct 15, 2017 | 04:16 PM
  #8  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,771
Likes: 1,001
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Speedometer/Odometer Not Working.

Or use this chart
Originally Posted by Atilla the Fun
Okay, I've had enough whining from the lazy and the weak-minded.
So I decided to just start on a cheat sheet. Not all combinations
can be exactly calibrated, but here's the best possible calibration
for each combination given.
This first batch is for anyone using a 700R-4 with any of these tire
sizes on the rear axle of their car:
205/60R15
225/55R16
245/50R16
245/45R17
275/40R17
315/35R17
245/40R18
If your tire size isn't here, don't use these results.
2.73:1 use 41 tooth driven with 19 tooth drive
2.77:1 39 18
2.86:1 38 17
2.93:1 39 17
3.00:1 40 17
3.07:1 41 17
3.07:1 36 15
3.08:1 41 17
3.08:1 36 15
3.23:1 38 15
3.23:1 43 17
3.25:1 38 15
3.27:1 44 17
3.31:1 44 17
3.31:1 39 15
3.42:1 40 15
3.45:1 41 15
3.50:1 41 15
3.54:1 42 15
3.55:1 42 15
3.70:1 44 15
3.73:1 44 15
more no cal.
Reply
Old Nov 5, 2017 | 11:15 AM
  #9  
JuanZ28's Avatar
Thread Starter
Junior Member
5 Year Member
Liked
Loved
 
Joined: Aug 2017
Posts: 68
Likes: 1
From: Lake Elsinore CA.
Car: 1987 Camaro Iroc Z28
Engine: 5.7 TPI
Transmission: 700R4
Re: Speedometer/Odometer Not Working.

Well just installed a new driven gear and test drove my car and speedometer and mileage was working again. Shortly after it stop working again. My question now is if my transmission has a shift kit or lockup converter can this cause the Driven gear to strip out?
Reply
Old Nov 5, 2017 | 11:30 AM
  #10  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,771
Likes: 1,001
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Speedometer/Odometer Not Working.

Did you pull the cable and lube with graphite ?
Reply
Old Nov 5, 2017 | 11:34 AM
  #11  
sofakingdom's Avatar
Supreme Member
20 Year Member
Community Builder
iTrader: (1)
 
Joined: Sep 2005
Posts: 27,918
Likes: 2,448
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Speedometer/Odometer Not Working.

if my transmission has a shift kit or lockup converter can this cause the Driven gear to strip out?
No. Failure to lube the cable would be the usual cause.

See my signature for a helpful mental technique that you can put to good use. You may rest assured, there are plenty of people with stock (lockout type) converters and shift kits, whose speedo cables don't bind and tear up speedo gears one after another.

Might want to pull the speedo cable core out and lube it before it just tears up another gear.
When you did this as previously advised would happen if you didn't do it and it happened anyway as predicted, what lube did you use?

Might want to also check your cruise regulator for binding, if you have that.
Reply
Old Nov 5, 2017 | 12:51 PM
  #12  
JuanZ28's Avatar
Thread Starter
Junior Member
5 Year Member
Liked
Loved
 
Joined: Aug 2017
Posts: 68
Likes: 1
From: Lake Elsinore CA.
Car: 1987 Camaro Iroc Z28
Engine: 5.7 TPI
Transmission: 700R4
Re: Speedometer/Odometer Not Working.

I didn't lube the cable. I inspected the speedometer cable and it spins freely.
Reply
Old Nov 5, 2017 | 12:57 PM
  #13  
JuanZ28's Avatar
Thread Starter
Junior Member
5 Year Member
Liked
Loved
 
Joined: Aug 2017
Posts: 68
Likes: 1
From: Lake Elsinore CA.
Car: 1987 Camaro Iroc Z28
Engine: 5.7 TPI
Transmission: 700R4
Re: Speedometer/Odometer Not Working.

Thanks Sofakingdom for the info. I'm going to buy a new cable and find out how to troubleshoot the Cruise Regulator.
Reply




All times are GMT -5. The time now is 12:06 AM.