GM's 4l75e disection!
#1
Member
Thread Starter
Join Date: Nov 2006
Location: Mesa, Az
Posts: 273
Likes: 0
Received 1 Like
on
1 Post
Car: 92 1LE B4C
Engine: 350
Transmission: 4L60
Axle/Gears: 4th gen 3.42
GM's 4l75e disection!
Hey guys I just received a 4L75E and have to swap out the output shaft to make it work in a 4WD application.
I've only rebuilt 10 or so 60E's and don't have endless knowledge on them. If you guys would like to know what is in one I would be happy to oblige. The issue being I don't know everything to look for especially in the valve body.
So, I will post some pics of what I see and if you want to see more or have me look at something specific please chime in!
I've only rebuilt 10 or so 60E's and don't have endless knowledge on them. If you guys would like to know what is in one I would be happy to oblige. The issue being I don't know everything to look for especially in the valve body.
So, I will post some pics of what I see and if you want to see more or have me look at something specific please chime in!
#2
Member
Thread Starter
Join Date: Nov 2006
Location: Mesa, Az
Posts: 273
Likes: 0
Received 1 Like
on
1 Post
Car: 92 1LE B4C
Engine: 350
Transmission: 4L60
Axle/Gears: 4th gen 3.42
Re: GM's 4l75e disection!
Here's what I have apart now.
The 2nd and 4th servos are the Sonnax Super Holds. I'm not sure if the 2nd servo comes with the springs already in it so I took it apart to see which ones were there.
I'm thinking the 2-3 shift valve is also the Sonnax Heavy Duty
2-3 Shift Valve. (Based on the hole in VB wall) I don't have it apart yet to inspect.
The 1-2 accumulator valve has the YZ stamp in it which I believe is just the latest one they are using. (correct me if I'm wrong)
The 2nd and 4th servos are the Sonnax Super Holds. I'm not sure if the 2nd servo comes with the springs already in it so I took it apart to see which ones were there.
I'm thinking the 2-3 shift valve is also the Sonnax Heavy Duty
2-3 Shift Valve. (Based on the hole in VB wall) I don't have it apart yet to inspect.
The 1-2 accumulator valve has the YZ stamp in it which I believe is just the latest one they are using. (correct me if I'm wrong)
Thread
Thread Starter
Forum
Replies
Last Post