T56, Dakota Digital, Speedo not moving at all?
Thread Starter
Joined: Mar 2001
Posts: 152
Likes: 5
From: Connersville, IN
Car: Camaros
T56, Dakota Digital, Speedo not moving at all?
I am finishing up the T56 swap (from a 700R4) right now in my '91 Camaro RS with a throttle body injected 350. I hooked up the Dakota digital box exactly like the instructions read. The needle on the speedo doesn't move at all. What could be my problem? The computer is giving me a code for the VSS. Bad VSS? Any way to check the VSS?
FYI...2 VSS wires - one to signal in, one to a good ground. 2 wires to the speedo - one to signal out #5, one to ground. Also power and ground going to the box. Does this sound right?
Thank you.
FYI...2 VSS wires - one to signal in, one to a good ground. 2 wires to the speedo - one to signal out #5, one to ground. Also power and ground going to the box. Does this sound right?
Thank you.
Thread Starter
Joined: Mar 2001
Posts: 152
Likes: 5
From: Connersville, IN
Car: Camaros
I ended up getting the speedo to move by using signal output #3 but I am still getting the VSS code in my computer. I haven't calibrated the speedo yet because we just got a bunch of snow. Hopefully this weekend, I'll get it all worked out.
Thread
Thread Starter
Forum
Replies
Last Post
