Dana 44 Drawings and Manuals
Thread Starter
Supreme Member
Joined: Dec 2005
Posts: 9,932
Likes: 893
From: 53.0907° N, 113.4695° W
Dana 44 Drawings and Manuals
There's been some interest in tech relating to these axles.
When I bought mine years ago it came along with the Dana blueprints. I did what I could to digitize them at the time. The results are a little clumsy in that rather than one 20" x 40" print, it's captured as several PDF's.
I'll post those here. Along with that I dug up a couple of manuals as well as the GM install guide.
Maybe this will help out a Thirdgenner somewhere.
The following 8 files are the original drawings. A full scale scan is in the works.
When I bought mine years ago it came along with the Dana blueprints. I did what I could to digitize them at the time. The results are a little clumsy in that rather than one 20" x 40" print, it's captured as several PDF's.
I'll post those here. Along with that I dug up a couple of manuals as well as the GM install guide.
Maybe this will help out a Thirdgenner somewhere.
The following 8 files are the original drawings. A full scale scan is in the works.
Last edited by skinny z; Mar 22, 2021 at 08:45 PM.
Junior Member
Joined: Dec 2020
Posts: 1
Likes: 0
From: Celina, ohio
Car: 88 iroc z
Engine: Ls3
Transmission: T56
Re: Dana 44 Drawings and Manuals
There's been some interest in tech relating to these axles.
When I bought mine years ago it came along with the Dana blueprints. I did what I could to digitize them at the time. The results are a little clumsy in that rather than one 20" x 40" print, it's captured as several PDF's.
I'll post those here. Along with that I dug up a couple of manuals as well as the GM install guide.
Maybe this will help out a Thirdgenner somewhere.
The following 8 files are the original drawings. A full scale scan is in the works.
When I bought mine years ago it came along with the Dana blueprints. I did what I could to digitize them at the time. The results are a little clumsy in that rather than one 20" x 40" print, it's captured as several PDF's.
I'll post those here. Along with that I dug up a couple of manuals as well as the GM install guide.
Maybe this will help out a Thirdgenner somewhere.
The following 8 files are the original drawings. A full scale scan is in the works.
Thread Starter
Supreme Member
Joined: Dec 2005
Posts: 9,932
Likes: 893
From: 53.0907° N, 113.4695° W
Re: Dana 44 Drawings and Manuals
Not sure how this is going to end. My prints disappeared into engineering with the head guy and I don't think I can count on his enthusiasm for timely results. Or results at all for that matter. And this is something I can't push because of the office politics.
That said, I'm back at the head office building later this week . Maybe there'll be a surprise waiting.
That said, I'm back at the head office building later this week . Maybe there'll be a surprise waiting.
Thread Starter
Supreme Member
Joined: Dec 2005
Posts: 9,932
Likes: 893
From: 53.0907° N, 113.4695° W
Re: Dana 44 Drawings and Manuals
As a follow up.
I can't say I got what I wanted out of engineering. Still separate documents as in post #1 which is no better than it was. As a courtesy I've got 8 little prints too. Each an 1/8 of the original. Hardly helpful. But I didn't want to push it.
So, I've got another source that I hope will end with a full sized copy of a single blueprint. 18 x 24 or around that.
I'll post updates.
I can't say I got what I wanted out of engineering. Still separate documents as in post #1 which is no better than it was. As a courtesy I've got 8 little prints too. Each an 1/8 of the original. Hardly helpful. But I didn't want to push it.
So, I've got another source that I hope will end with a full sized copy of a single blueprint. 18 x 24 or around that.
I'll post updates.
Last edited by skinny z; Apr 18, 2021 at 01:48 PM.
Thread
Thread Starter
Forum
Replies
Last Post
billsfirebird
Auto Detailing and Appearance
8
Sep 12, 2002 04:29 PM