Part name?
Thread Starter
Junior Member
Joined: Jun 2021
Posts: 6
Likes: 0
Part name?
Hey y'all, I was under my camaro, and saw that the plate between the bellhousing and engine is bent up. i cant find what this part is called to buy a new one, anyone got a clue what GM calls it?
Thanks
Thanks
Supreme Member
Joined: Jul 2006
Posts: 2,886
Likes: 797
From: 212 is up in this Bit@#
Car: Resto-Mod 1987 IROC-Z Clone
Engine: Alky fed L92 Vortec Twin-Turbo 6.8L
Transmission: My own built/ design 4L80M
Axle/Gears: Custom 12 bolt (4.10:1)
Re: Part name?
It is unclear if you are asking about a Manual Transmission or an Automatic Transmission...
If an Automatic Transmission; you could be referring to the Flex-Plate.
The Torque-Converter Bolts to it.
If a Manual Transmission; you could be referring to either the Fly-Wheel or a Bell-Housing Scatter-Shield Plate.
...or if your vehicle does not use Engine-Mounts; you could be referring to a Mid-Plate.
If an Automatic Transmission; you could be referring to the Flex-Plate.
The Torque-Converter Bolts to it.
If a Manual Transmission; you could be referring to either the Fly-Wheel or a Bell-Housing Scatter-Shield Plate.
...or if your vehicle does not use Engine-Mounts; you could be referring to a Mid-Plate.
Thread
Thread Starter
Forum
Replies
Last Post
easySPEEDcamaro
Auto Detailing and Appearance
20
Aug 15, 2002 08:19 PM