Where is the best place to buy a rear end?
Where is the best place to buy a rear end?
First of all, I want to tell you guys I am not posting here just to beg for a rear end, thats not what im trying to do., so please do not ban this post, I am just getting VERY frustrated, I have been looking for a POSI 3.23 , 3.27 , 3.42 or 3.73 POSI rear for the past YEAR AND A HALF, and still cannot find one. I have checked the EBAY, looked through misc car web pages, went to my local wrecking yards, and still no luck. Where is the best place to buy used camaro car parts like that? is there that awesome classifieds web page out there somewhere that has a whole bunch of camaro parts? The reason im getting so anxious, is because my SSM traction kit finally got here, and I dont want to put it on until I put in a new rear axle. So please understand im not trying to solicit you guys, I just need to know the best places to find used parts, because I am always in the market for camaro parts... THANKS GUYS!!! Let me know what you think.
Nate
P.s. what gear ratio would you guys suggest I go with anyways? Gas mileage is not an issue. I just want great acceleration off the line. right now I have a stock rear end, and if i start to creep, and then lay on the gas, the tire just starts smoking, and the car looses all its speed. As you can see, I have the TH350, so what rear do you recommend, and why? thansk guys
Nate
P.s. what gear ratio would you guys suggest I go with anyways? Gas mileage is not an issue. I just want great acceleration off the line. right now I have a stock rear end, and if i start to creep, and then lay on the gas, the tire just starts smoking, and the car looses all its speed. As you can see, I have the TH350, so what rear do you recommend, and why? thansk guys
Senior Member
iTrader: (4)
Joined: Aug 1999
Posts: 629
Likes: 0
From: previously OKINAWA JAPAN,georgia, now new england
Car: 1989 IROC--1989 T/A
Engine: 5.7 TPI in both
Transmission: W/C T-5 in both
Axle/Gears: B/W 3.27 in both
nate, i sold the 3.42 rear. But i am selling a 3.73 auburn disc rear. check it out in the temp classifieds....... shaggy
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
If you really need one and don't mind paying shipping from FL, go to www.tacreationsusa.com. They should have what you need.
If you're not in a hurry, you could find a 10 bolt rear and build up what you want.
There's 2 "complete" rears on ebay right now, one 3.27 9 bolt and one '96 2.73 posi.
http://search.ebaymotors.com/search/...26siteid%3D100
As far as ratio, if you want acceleration go for 4.10s or lower.
If you're not in a hurry, you could find a 10 bolt rear and build up what you want.
There's 2 "complete" rears on ebay right now, one 3.27 9 bolt and one '96 2.73 posi.
http://search.ebaymotors.com/search/...26siteid%3D100
As far as ratio, if you want acceleration go for 4.10s or lower.
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
I can answer that for you, Nate. When you open up to the main page, click on message Boards. When that page opens, go almost all the way to the bottom and click on the Temporary Classifieds Board.
Thread
Thread Starter
Forum
Replies
Last Post
hectre13
Engine/Drivetrain/Suspension Parts for Sale
2
Dec 11, 2023 08:14 AM
hectre13
Engine/Drivetrain/Suspension Parts for Sale
7
Aug 26, 2015 08:17 AM
AkDrifted
Engine/Drivetrain/Suspension Parts for Sale
6
Aug 17, 2015 07:45 PM





