Olds 3.1
Thread Starter
Supreme Member
Joined: Jul 1999
Posts: 1,431
Likes: 1
From: Huntsville, AL
Car: '00 Chevrolet Corvette
Engine: LS1
Transmission: 4L60E
Axle/Gears: 2.73
Olds 3.1
I've got a '90 Oldsmoblie Cutlass Supreme SL with a sideways 3.1L V6 (wrong wheel drive). I've seen a few posts about 3.1L V6's in the V6 F-Bodies. Is it the same V6 engine? Just wondering...
Supreme Member
Joined: Dec 2001
Posts: 1,282
Likes: 1
From: Elkton MD USA
Car: 1983, 1986
Engine: 2.8 2bbl, 2.8 MPFI
Transmission: 200C 3 speed, 700R4
Axle/Gears: 3.08, 3.42
Technically it is the same
However, it has some major differences between the two motors. One difference is the location of the starter. Another major difference is the intake port location on the heads and the way the valves are set up in the cylinder heads.
However, it has some major differences between the two motors. One difference is the location of the starter. Another major difference is the intake port location on the heads and the way the valves are set up in the cylinder heads.
I have a feeling you have a 3.3!
Same engine as a Buick, it's different.
It's not the same as our 60* V-6
Please make me be correct or incorrect.
Friend had a Buick and it was just a weird size engine not our 60* things.
Same engine as a Buick, it's different.
It's not the same as our 60* V-6
Please make me be correct or incorrect.
Friend had a Buick and it was just a weird size engine not our 60* things.
Thread
Thread Starter
Forum
Replies
Last Post






