Does anyone have any idea if there is a difference between overdrive gear ratios in a v6 700R4 and a v6 T5? Ive heard the first gear is a granny gear on a T5 in a v6 but is the 5th gear lower or higher than the 700R4?

 

service manual should have this info, or try the trans message board.

 

I rarely get a response on any of the other boards but I dont know why . Im guessing its b/c of the v6....

 

700r4 -

3.06
1.62
1.00
.70

V6 T5 -

1st - 4.03
2nd - 2.37
3rd - 1.49
4th - 1.00
5th - 0.76


V8 T5 -

1st - 2.95
2nd - 1.94
3rd - 1.34
4th - 1.00
(MK6 code)
5th - .73

(M39 code)
5th - .63

 

This actually varies alot more than you might think, Doward... I've never heard of more than one ratio set out of the 700R4.. to my knowledge all of them have a .70:1 overdrive.. but the full crossreference for T5 gear ratios, including overdrives, is here https://www.thirdgen.org/techbb2/sho...hreadid=162853

 

Thanks, thats a great link

 

Not sure if I would call 1st a granny gear in a T5 though it is very low.

 

he only listed on set for the 700r4

 

Yeah, there's only one set for the 700r4 - but major thanks for the T5 list!!!! CTRL+D for sure!

 

That was more of a rhetorical statement due to the low number of gear combinations he listed for the T5.