I am finally getting a new 3.4L from GM
Thread Starter
Junior Member
Joined: Jan 2005
Posts: 75
Likes: 0
From: ENGLISHTOWN NJ
Engine: 3.4lL 60* V6
Transmission: Tremic TKO 600 RR
I am finally getting a new 3.4L from GM
Hi All
Well it took almost 3 months but GM has agreed to replace my new 3.4 (only had 64 miles on it) after a cam lobe wiped out.
Thanks to all for your words of encouragement during this tough time of trying to get the new engine from them.
I will let you all know what kind of HP we are getting out of the engine when we dyno it.
Even with the base 160HP that they list for the crate, it should be intresting in a 1,700 lbs. car. 71 TVR Vixin)
Paul
Well it took almost 3 months but GM has agreed to replace my new 3.4 (only had 64 miles on it) after a cam lobe wiped out.
Thanks to all for your words of encouragement during this tough time of trying to get the new engine from them.
I will let you all know what kind of HP we are getting out of the engine when we dyno it.
Even with the base 160HP that they list for the crate, it should be intresting in a 1,700 lbs. car. 71 TVR Vixin)
Paul
Supreme Member
Joined: Jul 2001
Posts: 4,461
Likes: 0
From: BFE, MD
Car: 13 Ram 1500/ 78 Formy
Engine: 5.7 / 7.4
Transmission: 6sp / TH350
Axle/Gears: 3.55 posi / 3.23
I know Karl will do a jig when he reads that.
That engine in a 1700lb car will scream!!!!!!!!!!
decent intake, good exhaust.
That engine in a 1700lb car will scream!!!!!!!!!!
decent intake, good exhaust.
Thread
Thread Starter
Forum
Replies
Last Post