TPS problems?
Thread Starter
Junior Member
Joined: May 2010
Posts: 4
Likes: 0
TPS problems?
So, after changing some parts on my car and to no avail I decided to test the TPS
But I am a little confused at the moment. The car in question is a 1985 Camaro 2.8 F/I.
Now here is where I am confused. When I test it ( connected to the blue wire and the other one ) I get a 4.48 and when I go to WOT it sticks @ 1.01. Now I thought It was supposed to go UP and now DOWN. Am I testing it wrong?
I get 5v coming in. And I am 99% sure I am connected to the right wires.
But I am a little confused at the moment. The car in question is a 1985 Camaro 2.8 F/I.
Now here is where I am confused. When I test it ( connected to the blue wire and the other one ) I get a 4.48 and when I go to WOT it sticks @ 1.01. Now I thought It was supposed to go UP and now DOWN. Am I testing it wrong?
I get 5v coming in. And I am 99% sure I am connected to the right wires.
Supreme Member
iTrader: (8)
Joined: Aug 2003
Posts: 7,240
Likes: 6
From: LeRoy, NY
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Re: TPS problems?
Wrong wires. You're supposed to be testing between the blue and the black wires, not the gray and blue ones.
Thread
Thread Starter
Forum
Replies
Last Post
92camaroJoe
Tech / General Engine
6
Aug 13, 2015 06:07 AM
