Backfire after rebuild
09-19-2000, 03:33 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2000
Location: houston,tx,usa
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Backfire after rebuild
I put a rebuild 2.8L in an 86 camero. It has a slight backfire . It also lopes at idle when cold but better after it warms. It is a stock engine,Any ideas?
09-19-2000, 03:46 PM
#2
Supreme Member
Join Date: Mar 2000
Location: Central NJ, USA
Posts: 13,414
Likes: 0
Received 6 Likes
on
6 Posts
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
How's the timing? Is it at 10 degrees advanced (BTDC) with the EST connector unhooked?
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
09-19-2000, 03:47 PM
#3
Member
Join Date: Oct 1999
Location: Maryland,USA
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro
Engine: V6
Transmission: 700 R4
Tom beat me to it 
Have you checked the timing?
------------------
"In Racing You Have A SPLIT SECOND To Do It And Six Days To Talk About It!"
http://home.earthlink.net/~singleton052095
[This message has been edited by CC_HotRod (edited September 19, 2000).]
Have you checked the timing?
------------------
"In Racing You Have A SPLIT SECOND To Do It And Six Days To Talk About It!"
http://home.earthlink.net/~singleton052095
[This message has been edited by CC_HotRod (edited September 19, 2000).]
Thread
Thread Starter
Forum
Replies
Last Post