I figure my 206,000 mile injectors have got some kinda dirt in them. So, I sent my injectors away to Rich Jensen at http://www.cruzinperformance.com for a flow-test, cleaning, and flow matching. His prices are great- I don't think I could buy one new injector for what he'll charge.

Technically, I sent him my spare set of injectors, from a 1987 2.8l MPFI. I have no idea how many miles are on 'em, but it's gotta be less than what's on my motor! I figure I'll swap them in as soon as they come back. I might even send him my '86 injectors to get them flow-tested, to see how "well" they compare.


------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards

 

How much is it settign you back?

-Reno

 

He wants $5/injector for a flow test only. For an initial flow test, disassembly & cleaning, and reassembly/final flow test, it's $10/injector.

If he has "spare" injectors, he'll substitute ones to make a matched set for $5/substituted injector. So max, without matching a set, would be $60. Max with switching all the injectors, er, well make that 5 injectors, would be $85.


------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards

 

Tom you must have been reading my mind.. I am getting my plenum upper and lower chromed and I wanted to get my Injectors done and you have found the answer I was looking for..

THANKS!!! Let me know what you think when ya get them back...