Damn Im being a post whore :)
Damn Im being a post ***** :)
Ok take a look at this. Its a 60* performance site it is mainly the FWD cars though. Anyways under valve train it has...
Crane Cams Part # Cost
Gold Aluminum Roller Rocker arms
1.6:1 270-25750
(Jegs mail order) $284.99 (I never even knew we could get those)
Performance Springs 270-99848-12 $61.99 (or those)
Spring Retainers Stock units will work with above springs
99915-12 If installed height is 1.7 stock
99849-12 If installed height is 1.6 stock $49.00 (Im lost as to what this is or does)
Magnum roller tipped rocker arm 249-1413-12 10mm 1.52:1
249-1414-12 10mm 1.6:1 $109.99
$163.99 (now these are the rocker arms I knew about)
Springs 249-987-12 $47.00
GM Performance Part # Cost
Performance Spring 12363215 $4.97 ech.
So what you guys think?
Crane Cams Part # Cost
Gold Aluminum Roller Rocker arms
1.6:1 270-25750
(Jegs mail order) $284.99 (I never even knew we could get those)
Performance Springs 270-99848-12 $61.99 (or those)
Spring Retainers Stock units will work with above springs
99915-12 If installed height is 1.7 stock
99849-12 If installed height is 1.6 stock $49.00 (Im lost as to what this is or does)

Magnum roller tipped rocker arm 249-1413-12 10mm 1.52:1
249-1414-12 10mm 1.6:1 $109.99
$163.99 (now these are the rocker arms I knew about)
Springs 249-987-12 $47.00
GM Performance Part # Cost
Performance Spring 12363215 $4.97 ech.
So what you guys think?
Supreme Member
Joined: Jul 2000
Posts: 4,541
Likes: 2
Car: 1991 Corvette Coupe
Engine: L98
Transmission: 700R4/4L60 same trans different name
monkie, you are in the perfect position to do this!!!!!!!
go straight to the top!!!!!
you got 2 cars.........you can drive the Z28 while you work on the RS.......................
if you can afford it do it!!!!!!
if i had the time and money i'd do it too,
but i dont, so i think i am just gonna swap in a carbed 350
get the gold 1.6 full rockers
also get the 2030 cam
damn, maybe you should throw a 3.4 in there 2????!!!!!!
go straight to the top!!!!!
you got 2 cars.........you can drive the Z28 while you work on the RS.......................
if you can afford it do it!!!!!!
if i had the time and money i'd do it too,
but i dont, so i think i am just gonna swap in a carbed 350
get the gold 1.6 full rockers
also get the 2030 cam
damn, maybe you should throw a 3.4 in there 2????!!!!!!
Originally posted by 1991tealRSt-topGuy
monkie, you are in the perfect position to do this!!!!!!!
go straight to the top!!!!!
you got 2 cars.........you can drive the Z28 while you work on the RS.......................
if you can afford it do it!!!!!!
if i had the time and money i'd do it too,
but i dont, so i think i am just gonna swap in a carbed 350
get the gold 1.6 full rockers
also get the 2030 cam
damn, maybe you should throw a 3.4 in there 2????!!!!!!
monkie, you are in the perfect position to do this!!!!!!!
go straight to the top!!!!!
you got 2 cars.........you can drive the Z28 while you work on the RS.......................
if you can afford it do it!!!!!!
if i had the time and money i'd do it too,
but i dont, so i think i am just gonna swap in a carbed 350
get the gold 1.6 full rockers
also get the 2030 cam
damn, maybe you should throw a 3.4 in there 2????!!!!!!
) but I got the money to do this. Right now all I am looking at doing is getting 240hp. I can do it and I have the road planned out its just getting the parts. THEN after I get that done I am going to enjoy the RS being fast. While I am enjoying it I am taking out a loan of about 9 grand or so and talking to this guy up the street about putting in a 3.8L turbo in my RS. I am sick of the V8 actually. With the bigger cam and all you can really tell the gas issue
Trust me guys V8s arent all what they are cracked up to be. LOL its funny how they say the new LS1's get 25mpg. Yea that is if you baby it to hell. Anyways thats my plan. I should be close to the fastest V6 on here. Anyone disagree?
Originally posted by 20-psi
Monkie, you must have a lot of time on your hands with all that snow you got down there.
Pete
Monkie, you must have a lot of time on your hands with all that snow you got down there.
Pete
Thread
Thread Starter
Forum
Replies
Last Post
GeneralIesrussi
Tech / General Engine
0
Sep 3, 2015 03:23 AM




