ok guys, i need your help im stuck. im replacing the control arms(front) with tubular ones and heres the deal. the back bolts are frozen in(frozen to the metal sleves inside the rubber pieces. ive alreay hacked the bulk of the control arm away but still have no idea how to get the bots out. they wont hammer out, i dont have a good enouh torch, and my sawzal will no cut through the metal sleeves for some reason. itllcut just abou anything else but not those sleeves.

 

HEHE find the wonderful uses of the AIR HAMMER!. Soak in WD40 then hammer away.


P.S. Thanks for keeping the faith Dead... I am still waiting on the die... But do have the bender at least.

 

Me?
Removing?
Find that torch.
AND a bigger hammer.
OR new blades.

 

tubular front control arms ona V6... Tell me about it, part #'s and why?

 

Do a search I think spoon might make them I used to have the other guys page marked. He makes a coil over kit for the front of our 3rds that cuts out close to 75 pounds!. I will search again and try to find it. http://www.globalwest.net/camaro93.htm

 

A arms Chromoly non-adjustable from Performance Automotive $349 part number 1199C/M

http://www.paracing.net/