INTERIOR PARTS
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Supreme Member
iTrader: (4)
Joined: Apr 2005
Posts: 1,124
Likes: 0
From: Cleveland, Ohio
Car: 1992 Firebird
Engine: 3.1L V6
Transmission: 5 Speed Manual
Axle/Gears: 3.42 Peg Leg
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Cool, could probably get it if 92 is the same as other years, will have to look.
Ray
Ray
Supreme Member
iTrader: (4)
Joined: Apr 2005
Posts: 1,124
Likes: 0
From: Cleveland, Ohio
Car: 1992 Firebird
Engine: 3.1L V6
Transmission: 5 Speed Manual
Axle/Gears: 3.42 Peg Leg
Hey,
I think it is, as long as the wiring is for the black one, I can splice it in. Let me know. Thanks.
/edit: I realize this isnt interior related, but since Im talking to you already, I figured I'd keep it all in one spot. Im also looking for the bolt that goes into the AC compressor through the bracket that is attached to the top of the 3.1L V6 intake.
I think it is, as long as the wiring is for the black one, I can splice it in. Let me know. Thanks.
/edit: I realize this isnt interior related, but since Im talking to you already, I figured I'd keep it all in one spot. Im also looking for the bolt that goes into the AC compressor through the bracket that is attached to the top of the 3.1L V6 intake.
Last edited by cooltc2004; Feb 19, 2007 at 04:16 PM.
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Hey,
I think it is, as long as the wiring is for the black one, I can splice it in. Let me know. Thanks.
/edit: I realize this isnt interior related, but since Im talking to you already, I figured I'd keep it all in one spot. Im also looking for the bolt that goes into the AC compressor through the bracket that is attached to the top of the 3.1L V6 intake.
I think it is, as long as the wiring is for the black one, I can splice it in. Let me know. Thanks.
/edit: I realize this isnt interior related, but since Im talking to you already, I figured I'd keep it all in one spot. Im also looking for the bolt that goes into the AC compressor through the bracket that is attached to the top of the 3.1L V6 intake.
Ray
Supreme Member
Joined: Aug 2002
Posts: 2,134
Likes: 1
From: Washington state
Car: 87 Irocz, 95 Z28, 71 Z28 /RS
Engine: 355 Tpi, LT1, 355
Transmission: Auto, Auto, 4sp
ok I am looking for seats nice ones
these in either black leather or the upgraded cloth.

My husband had a set that were the nice cloth that was black with purple (dark) & he will like a set of those.
Also he is looking for a set of black carpet complete set.
these in either black leather or the upgraded cloth.

My husband had a set that were the nice cloth that was black with purple (dark) & he will like a set of those.
Also he is looking for a set of black carpet complete set.
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Sorry, we dont' have them available.
----------
Oh yes , carpet is decent but not new or mint, we can get it, but not untill the snow melts and dries out. It is not mint and most likely been wet. But some can be pieced together to make a decent set.
Ray
Last edited by RCAR7395; Feb 21, 2007 at 04:11 AM. Reason: Automerged Doublepost
Joined: Nov 2006
Posts: 299
Likes: 0
From: NAVARRE, FLORIDA
Car: 79, 85, 87,91 TRANS AM'S
Engine: 455,305TPI,350TPI,350TPI
Transmission: MUNCIE, T-5, 700R4'S
Axle/Gears: YEP
HOWS IT GOIN, IM LOOKING FOR JUST A REAR SEAT COUSION IN GAY CLOTH IN GOOD SHAPE ANY CHANCE ON THAT? THANKS
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Member
Joined: Oct 2006
Posts: 167
Likes: 0
From: Santa Clarita, CA
Car: 91 LT1 RS 89 IROC-Z 350 TPI
Engine: LT1 // 350 TPI
Transmission: WC T5 // 700R4
Axle/Gears: BW 9 Bolt 3.27 //BW 9 Bolt 2.77
hey, I have a 91 camaro and I'm in need of a tilt steering column with key and vats...
How much (if you have it) shipped to 91387?
thanks
How much (if you have it) shipped to 91387?
thanks
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Member
Joined: Oct 2006
Posts: 167
Likes: 0
From: Santa Clarita, CA
Car: 91 LT1 RS 89 IROC-Z 350 TPI
Engine: LT1 // 350 TPI
Transmission: WC T5 // 700R4
Axle/Gears: BW 9 Bolt 3.27 //BW 9 Bolt 2.77
THANKS
Actually, I only really need the peice that goes on the very end of the steering column, like the outter black housing that actually does the tilting(that part of the housing where the blinker switch goes in and the flasher button, etc) and i need the ignition cylinder, with key+VATS and the long metal bar that switches the bright on/off for a tilt assembly.
Actually, I only really need the peice that goes on the very end of the steering column, like the outter black housing that actually does the tilting(that part of the housing where the blinker switch goes in and the flasher button, etc) and i need the ignition cylinder, with key+VATS and the long metal bar that switches the bright on/off for a tilt assembly.
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
THANKS
Actually, I only really need the peice that goes on the very end of the steering column, like the outter black housing that actually does the tilting(that part of the housing where the blinker switch goes in and the flasher button, etc) and i need the ignition cylinder, with key+VATS and the long metal bar that switches the bright on/off for a tilt assembly.
Actually, I only really need the peice that goes on the very end of the steering column, like the outter black housing that actually does the tilting(that part of the housing where the blinker switch goes in and the flasher button, etc) and i need the ignition cylinder, with key+VATS and the long metal bar that switches the bright on/off for a tilt assembly.
We will probably be forced to buy the whole thing.
Understandable though
Ray
Junior Member
Joined: May 2005
Posts: 6
Likes: 0
From: Phoenix for a couple more months
Car: 97 Firebird
Engine: 3.8
Transmission: auto
97 Fbird
I need sunvisors, the manual lock slides for the door panels, headliner, ashtray door if it is possible. Not sure what else, I'll post if I think of more.
Junior Member
iTrader: (1)
Joined: Sep 2006
Posts: 49
Likes: 0
From: Ontario, Canada
Car: 1988 GTA
Engine: 5.7L
Transmission: 700R4
Switch Bezels/Panels
I need the (two? I think it's a two piece set) bezel/panel(s) that the rear window defrost, fog light, etc. switches fit in. They sit underneath the instrument cluster bezel.
I pulled a couple of pics from another post (ignore the yellow and red circles).
What I'm doing is swapping my digital cluster for an analog cluster. When I pulled the bezels from the digital one, I realized that they are one piece but the analog setup is designed as a two piece.
Anyway, now I need the switch bezels (that is what I'm calling them). Colour makes little difference as they are likely going to be be sprayed to match my interior accents anyway. Send cost with shipping for L9W5H5, Ontario, Canada.
Thanks
Matt
I pulled a couple of pics from another post (ignore the yellow and red circles).
What I'm doing is swapping my digital cluster for an analog cluster. When I pulled the bezels from the digital one, I realized that they are one piece but the analog setup is designed as a two piece.
Anyway, now I need the switch bezels (that is what I'm calling them). Colour makes little difference as they are likely going to be be sprayed to match my interior accents anyway. Send cost with shipping for L9W5H5, Ontario, Canada.
Thanks
Matt
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
I need the (two? I think it's a two piece set) bezel/panel(s) that the rear window defrost, fog light, etc. switches fit in. They sit underneath the instrument cluster bezel.
I pulled a couple of pics from another post (ignore the yellow and red circles).
What I'm doing is swapping my digital cluster for an analog cluster. When I pulled the bezels from the digital one, I realized that they are one piece but the analog setup is designed as a two piece.
Anyway, now I need the switch bezels (that is what I'm calling them). Colour makes little difference as they are likely going to be be sprayed to match my interior accents anyway. Send cost with shipping for L9W5H5, Ontario, Canada.
Thanks
Matt
I pulled a couple of pics from another post (ignore the yellow and red circles).
What I'm doing is swapping my digital cluster for an analog cluster. When I pulled the bezels from the digital one, I realized that they are one piece but the analog setup is designed as a two piece.
Anyway, now I need the switch bezels (that is what I'm calling them). Colour makes little difference as they are likely going to be be sprayed to match my interior accents anyway. Send cost with shipping for L9W5H5, Ontario, Canada.
Thanks
Matt
Ray
Supreme Member
iTrader: (4)
Joined: Apr 2005
Posts: 1,124
Likes: 0
From: Cleveland, Ohio
Car: 1992 Firebird
Engine: 3.1L V6
Transmission: 5 Speed Manual
Axle/Gears: 3.42 Peg Leg
Member

Joined: Dec 2005
Posts: 199
Likes: 3
From: CALIFORNIA
Car: CAMARO RS
Engine: 3.1 V6,5.0 tpi
Transmission: AUTOMATIC, t5
Axle/Gears: one tire fire ,posi disc
i need a dash with wireing and gauges from an 89 firebird or trans am preferably a v8 with manual tranny but not picky pm me.
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Joined: Jun 2005
Posts: 217
Likes: 0
From: Santa Clarita, California
Car: 1990 RS/2000 Z28
Engine: 5.0/5.7
Transmission: 4L60/4L60E
Axle/Gears: 10 bolt/3.23
Help me out.
I need a flawless(no cracks, no visible wear, etc.) top dash(Dash Pad) for a 1990 camaro. I also need a flawless BLACK Headliner Trim Piece with screws/hardware for the same vehicle(T-Top). Thanks! http://www.hawksthirdgenparts.com/Pr...dlinertrim.jpg
I need a flawless(no cracks, no visible wear, etc.) top dash(Dash Pad) for a 1990 camaro. I also need a flawless BLACK Headliner Trim Piece with screws/hardware for the same vehicle(T-Top). Thanks! http://www.hawksthirdgenparts.com/Pr...dlinertrim.jpg
Larry Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Joined: Oct 2004
Posts: 2,086
Likes: 0
Car: 2012 Corvette
Engine: LS3
Transmission: TR6060
Got any 90-92 Camaros with the courtesy lights under the dash? I don't know if the 82-89 cars have the same bulb holder assembly that works in the 90-92 hush panels. My car doesn't have them and I want to add them so I'll need all the wiring too.
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
let me know.
Ray
Member
Joined: Jul 2005
Posts: 237
Likes: 0
From: Long Island, NY
Car: 1987 camaro
Engine: 6 cylinder
Transmission: 5-speed
Im Looking for a complete BLack seat belt set for a 1987 camaro with the rear lap belts, an 87 camaro dash pad in good condition, and black sun visors...if you have any or these please Send pics to Transam346x@aol.com
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Im Looking for a complete BLack seat belt set for a 1987 camaro with the rear lap belts, an 87 camaro dash pad in good condition, and black sun visors...if you have any or these please Send pics to Transam346x@aol.com
pm sent
looking for parts for my 89 maro, i need the driver side manual mirrior thing in black along with some interior torx screws and the big fat screws and white clips for the back panels.thanks!
Larry Junior Member
iTrader: (1)
Joined: Aug 2002
Posts: 34
Likes: 0
From: East TN
Car: 91 Camaro
Engine: 355
Transmission: Th700R4
Axle/Gears: 3.73
I'm looking for a dash pad in great/mint condition (no cracks or visible wear) for a 91 Camaro
Last edited by leecar83; Mar 10, 2007 at 07:53 PM.
Member

Joined: Dec 2005
Posts: 179
Likes: 0
From: San Antonio, Texas
Car: Red 1984 Z-28
Engine: 4.8 LS
Transmission: 4L60E
Axle/Gears: 3.73
I need a quote on all black interior plastic pieces, rear black lap belts for an 84 Z-28, converting blue interior for black. And black rear seats ONLY. Willing to trade old interior to cut back on some of the cost
. Old interior would include the seats (front and back, all major plastic, center console and seat belts (all 4). Sorry no carpet. Center console would be missing the lid because I am keeping the RPO sheet with the car.
Also looking for a black dashpad. Doesn't need to be perfect, but no huge cracks. A small one here or there is fine.
All of this shipped to 85029. Just want the quote for now. Thanks a lot!
. Old interior would include the seats (front and back, all major plastic, center console and seat belts (all 4). Sorry no carpet. Center console would be missing the lid because I am keeping the RPO sheet with the car.Also looking for a black dashpad. Doesn't need to be perfect, but no huge cracks. A small one here or there is fine.
All of this shipped to 85029. Just want the quote for now. Thanks a lot!
Senior Member
iTrader: (5)
Joined: Dec 2006
Posts: 2,212
Likes: 0
From: Augusta, Ga
Car: 1987 Trans Am
Engine: 355ci L98 soon to be turbo'd
Transmission: 700R4
Axle/Gears: 2.73 posi
Greetings parts Gods,
I was wondering if you guys have two (2) electric window switches that will fit my 1987 Trans Am, I don't need "mint" condition, just working. Color isn't that big of an issue, but "the blacker, the better". Thanks. Ship quote for 29841, North Augusta, South Carolina.
Thank You.
I was wondering if you guys have two (2) electric window switches that will fit my 1987 Trans Am, I don't need "mint" condition, just working. Color isn't that big of an issue, but "the blacker, the better". Thanks. Ship quote for 29841, North Augusta, South Carolina.
Thank You.
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Greetings parts Gods,
I was wondering if you guys have two (2) electric window switches that will fit my 1987 Trans Am, I don't need "mint" condition, just working. Color isn't that big of an issue, but "the blacker, the better". Thanks. Ship quote for 29841, North Augusta, South Carolina.
Thank You.
I was wondering if you guys have two (2) electric window switches that will fit my 1987 Trans Am, I don't need "mint" condition, just working. Color isn't that big of an issue, but "the blacker, the better". Thanks. Ship quote for 29841, North Augusta, South Carolina.
Thank You.
Supreme Member
iTrader: (1)
Joined: Mar 2004
Posts: 1,319
Likes: 1
From: Pittsburgh & Allentown PA
Car: 1992 Z28 (Heritage Edition)
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 2.73 Posi
hey i was the first person to post in this topic and you told me that you'd get back to me but you never did?!!?
Anyway, i'm sure your busy but i still would like to get some stuff from you if you have the parts i'm looking for...
-[uncracked] black dash pad for a 92 Camaro (even though i believe all the third gen's dash pads are the same)
-Passenger Side Large AC/Heat Vent (i would assume that the drivers side and passengers side larger vents are exactly the same, but i am specifying passengers side just incase they're different)
I would really appreciate it if you could get back to me cause I'd like to have these parts purchased before i get home for the summer!
Anyway, i'm sure your busy but i still would like to get some stuff from you if you have the parts i'm looking for...
-[uncracked] black dash pad for a 92 Camaro (even though i believe all the third gen's dash pads are the same)
-Passenger Side Large AC/Heat Vent (i would assume that the drivers side and passengers side larger vents are exactly the same, but i am specifying passengers side just incase they're different)
I would really appreciate it if you could get back to me cause I'd like to have these parts purchased before i get home for the summer!
Junior Member
Joined: Jun 2005
Posts: 43
Likes: 0
From: Denver
Car: 1983 Pontiac Firebird
Engine: LG4 305cid 4BBL E4ME Quadrajet
Transmission: 700R4
Wondering if you have black T-Top plastic for both sides of an 83 Firebird without locks? 3 screw pattern, no cracks please
PM me, respond, or e-mail me at Graywolfman@yahoo.com. I can post pictures of what I need if required.
PM me, respond, or e-mail me at Graywolfman@yahoo.com. I can post pictures of what I need if required. Member

Joined: Dec 2005
Posts: 179
Likes: 0
From: San Antonio, Texas
Car: Red 1984 Z-28
Engine: 4.8 LS
Transmission: 4L60E
Axle/Gears: 3.73
When you get time, just email me the qoute for my request farther up the page, thanks!
sstsephiroth@gmail.com
Kyle
sstsephiroth@gmail.com
Kyle
Junior Member
Joined: Jan 2007
Posts: 81
Likes: 0
From: Michigan
Car: 1986 Chevrolet Camaro Z28/99 Aurora
Engine: LB9 5.0 TPI/4.0 V8
Transmission: 700r4/?
Axle/Gears: 2.73/3.08
I need a headliner and door panels for a 1985 Chevrolet Camaro with t-tops. I would like them in black grey or red if possible.
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Thanks
Ray
----------
Wondering if you have black T-Top plastic for both sides of an 83 Firebird without locks? 3 screw pattern, no cracks please
PM me, respond, or e-mail me at Graywolfman@yahoo.com. I can post pictures of what I need if required.
PM me, respond, or e-mail me at Graywolfman@yahoo.com. I can post pictures of what I need if required.Thanks,
Ray
Last edited by RCAR7395; Mar 17, 2007 at 04:13 AM. Reason: Automerged Doublepost
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
hey i was the first person to post in this topic and you told me that you'd get back to me but you never did?!!?
Anyway, i'm sure your busy but i still would like to get some stuff from you if you have the parts i'm looking for...
-[uncracked] black dash pad for a 92 Camaro (even though i believe all the third gen's dash pads are the same)
-Passenger Side Large AC/Heat Vent (i would assume that the drivers side and passengers side larger vents are exactly the same, but i am specifying passengers side just incase they're different)
I would really appreciate it if you could get back to me cause I'd like to have these parts purchased before i get home for the summer!
Anyway, i'm sure your busy but i still would like to get some stuff from you if you have the parts i'm looking for...
-[uncracked] black dash pad for a 92 Camaro (even though i believe all the third gen's dash pads are the same)
-Passenger Side Large AC/Heat Vent (i would assume that the drivers side and passengers side larger vents are exactly the same, but i am specifying passengers side just incase they're different)
I would really appreciate it if you could get back to me cause I'd like to have these parts purchased before i get home for the summer!

Let us know.
Thanks
Ray
----------
pm sent
Last edited by RCAR7395; Mar 17, 2007 at 04:21 AM. Reason: Automerged Doublepost






