INTERIOR PARTS
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
INTERIOR PARTS
POST INTERIOR PARTS REQUESTS HERE.
Last edited by RCAR7395; Dec 9, 2006 at 04:34 AM.
Looking for a driver side lower padded dash panel for a 91 Firebird Formula and also a console door with no cracks or coming apart
Last edited by AaronIROCZ; Dec 10, 2006 at 07:28 PM.
Trending Topics
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Sorry about the delay in the catalog delivery. I sent an email it may be a few days. Been busy and I am trying to deliver several all at once instead of sending 25 emails 3 or 4 times in a week. It is alot to look through as you will see!
It's on the way !
Merry Xmas
Ray
Supreme Member
iTrader: (25)
Joined: Jul 2004
Posts: 2,623
Likes: 0
From: Beautiful BC
Car: '88 IROC-Z / '91 Z28 / '91 GTA
Engine: LT4 Hot Cam 305 / L98 355 / MR 383
Transmission: 5-spd / 700R4 / 700R4
Axle/Gears: 3:45 / 3:23 / 3:23
Looking for a passenger side grey seat belt, the retactor part, to replace mine in an '88 IROC. Let me know what you got, and how much. If you PM'd me, it would probably be easiest. Thanks.
Junior Member
iTrader: (2)
Joined: Aug 2006
Posts: 92
Likes: 0
From: Tampa
Car: 1989 Trans Am GTA
Engine: 350 TPI
Transmission: 700R4 with shift kit
headliner
I need a headliner (t-top) i removed mine in attempt to re-cover it... I got it out fine which was a huge accomplishment, and then when i was carrying it back to the bench, i tripped over an extention cord, and destroyed mine









color preferance is grey, but ill take another color and recover it, or at least try to, i hear its pretty difficult.
or a non covered pad, thats cool too, just needs to be in one piece, and no chunks missing (or at least to big ones)
Get back to me on what you have available.









color preferance is grey, but ill take another color and recover it, or at least try to, i hear its pretty difficult.
or a non covered pad, thats cool too, just needs to be in one piece, and no chunks missing (or at least to big ones)
Get back to me on what you have available.
Junior Member
Joined: Aug 2006
Posts: 86
Likes: 0
From: Imperial Beach, CA
Car: 1992 Camaro RS
Engine: LO3
Transmission: T5
Axle/Gears: 3.08
I'm looking for-
- Screws/mounts for the driver side hush panel.
- Screw for the top of the driver side A pillar on a t-top car.
- A cigarette lighter for a 92 RS.
- Covers for the seat track ends. (Rears) and screws.
, Will
- Screws/mounts for the driver side hush panel.
- Screw for the top of the driver side A pillar on a t-top car.
- A cigarette lighter for a 92 RS.
- Covers for the seat track ends. (Rears) and screws.
, Will Supreme Member
iTrader: (21)
Joined: Dec 2005
Posts: 4,075
Likes: 1
Car: 04 Silverado
Engine: 4.8
Transmission: auto
Junior Member
iTrader: (1)
Joined: Dec 2003
Posts: 55
Likes: 6
From: N. KY
Car: 99 T/A Firehawk, 1991 Formula
Engine: LS-1, LB9
Transmission: M6, M5
Axle/Gears: 3.42, 3.42
looking for the black top panel for both door panels. Need them in as close to perfect shape as possible.
thanks
Dennis
thanks
Dennis
Joined: Dec 2005
Posts: 4,795
Likes: 15
From: St. Cloud, MN
Car: 1984 Trans Am
Engine: LS1383 in work
Transmission: Magnum F - to be installed
Axle/Gears: Zexel Torsen 3.73, 28-spline mosers
Screw retainers and Dash panel
This is for an 84 Trans Am. I'm looking for those white retainer clips that the plastic trunk panel screws (For example, the panel that covers the spare tire) screw into. All of mine are broke and need to be replaced.
I'm also looking for a new dash panel. This is a black panel that screws to the bottom-front of the dash. It's the first panel under the glovebox/map pocket that I have.
I'm also looking for a new dash panel. This is a black panel that screws to the bottom-front of the dash. It's the first panel under the glovebox/map pocket that I have.
Supreme Member
Joined: Aug 2004
Posts: 4,168
Likes: 3
From: Marietta, GA
Car: '91 Firebird Convertible
Engine: 305 TBI (LO3)
Transmission: 700r4, Vette Servo
Axle/Gears: 3.27 9 Bolt, PBR disks
Cadillac's wishlist
I'm sure I am going to forget something:
1.) Leather Interior: Tan/Beechwood/Camel. Power seats or not, I don't car. I just want them to be a reasonable price for reasonable condition.
2.) Seat belts - Same color as above also with the the frame attachements and plastic for a convertible (may be a tall order).
3.) Passenger's side cup/map holder (pocket). Same color as above.
4.) 4X6 speaker covers for the rears installed on the vinyl covered hush panel.
5.) Mint map pocket (you know, the excuse for a glove box?). Mine has a tear in it. Would consider replacing it with a prime example.
That's it for now. I'm in no hurry.
1.) Leather Interior: Tan/Beechwood/Camel. Power seats or not, I don't car. I just want them to be a reasonable price for reasonable condition.
2.) Seat belts - Same color as above also with the the frame attachements and plastic for a convertible (may be a tall order).
3.) Passenger's side cup/map holder (pocket). Same color as above.
4.) 4X6 speaker covers for the rears installed on the vinyl covered hush panel.
5.) Mint map pocket (you know, the excuse for a glove box?). Mine has a tear in it. Would consider replacing it with a prime example.
That's it for now. I'm in no hurry.
Supreme Member
iTrader: (21)
Joined: Dec 2005
Posts: 4,075
Likes: 1
Car: 04 Silverado
Engine: 4.8
Transmission: auto
----------
I'm sure I am going to forget something:
1.) Leather Interior: Tan/Beechwood/Camel. Power seats or not, I don't car. I just want them to be a reasonable price for reasonable condition.
2.) Seat belts - Same color as above also with the the frame attachements and plastic for a convertible (may be a tall order).
3.) Passenger's side cup/map holder (pocket). Same color as above.
4.) 4X6 speaker covers for the rears installed on the vinyl covered hush panel.
5.) Mint map pocket (you know, the excuse for a glove box?). Mine has a tear in it. Would consider replacing it with a prime example.
That's it for now. I'm in no hurry.
1.) Leather Interior: Tan/Beechwood/Camel. Power seats or not, I don't car. I just want them to be a reasonable price for reasonable condition.
2.) Seat belts - Same color as above also with the the frame attachements and plastic for a convertible (may be a tall order).
3.) Passenger's side cup/map holder (pocket). Same color as above.
4.) 4X6 speaker covers for the rears installed on the vinyl covered hush panel.
5.) Mint map pocket (you know, the excuse for a glove box?). Mine has a tear in it. Would consider replacing it with a prime example.
That's it for now. I'm in no hurry.
2-No verts
3-We have one cupholder in grey.
4-None
5-We do have a few mint ones.
Wow, 1 out of 5
Last edited by 82 Iron Duke; Dec 29, 2006 at 04:16 PM. Reason: Automerged Doublepost
Supreme Member
Joined: Aug 2004
Posts: 4,168
Likes: 3
From: Marietta, GA
Car: '91 Firebird Convertible
Engine: 305 TBI (LO3)
Transmission: 700r4, Vette Servo
Axle/Gears: 3.27 9 Bolt, PBR disks

How much for the map holder? Got pics?
You have a PM.
Junior Member
Joined: May 2002
Posts: 84
Likes: 0
From: Phoenix,AZ
Car: 67 ss 89 rs
Engine: 327 350tbi
Transmission: 5speed
need parts for 89 camaro rs
I also need the fasteners that hold the shift / ashtray panel to the top of the center console. I believe they are like a hex bolt style.
Supreme Member
iTrader: (21)
Joined: Dec 2005
Posts: 4,075
Likes: 1
Car: 04 Silverado
Engine: 4.8
Transmission: auto
Hello Chad, you can buy those plastic screws and threaded inserts brand new at Pep Boys, Autozone etc but in black only. I believe you need torx screws, send a couple of buxs for shipping and we will get them out to you.
Senior Member
iTrader: (2)
Joined: Jun 2004
Posts: 647
Likes: 1
From: South Jersey
Car: 1991 RS Convertible
Engine: 96 LT1
Transmission: T5
Axle/Gears: 3.45 9-Bolt
I need the following for a 91 RS...
-(2) Power Window Switches
-(1) Arm Rest Mounting Bolt (Approx 2" long torx bolt that goes under the arm rest)
-(1) Power Mirror Switch (Mounts in Drivers door)
-(1) Upper portion of center console (Must have "hump" inside of storage compartment to clear newer style E-Brake)
-(1) E-Brake Warning Light Switch
-(1) Lighted Rear-View Mirror w/ harness
-(1) E-Brake Grip Screw (Very short screw that attached the grip to the handle.
Let me know what you have & give me a price shipped to ZIP 19020. And of course all parts must be in good condition.
-(2) Power Window Switches
-(1) Arm Rest Mounting Bolt (Approx 2" long torx bolt that goes under the arm rest)
-(1) Power Mirror Switch (Mounts in Drivers door)
-(1) Upper portion of center console (Must have "hump" inside of storage compartment to clear newer style E-Brake)
-(1) E-Brake Warning Light Switch
-(1) Lighted Rear-View Mirror w/ harness
-(1) E-Brake Grip Screw (Very short screw that attached the grip to the handle.
Let me know what you have & give me a price shipped to ZIP 19020. And of course all parts must be in good condition.
Last edited by JerseyMark; Jan 2, 2007 at 08:57 AM.
Senior Member
iTrader: (3)
Joined: Jul 1999
Posts: 816
Likes: 0
From: Mechanicsburg, PA
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
Looking for overhead B pillar plastic piece in black (not cracked). Also looking for overhead console in black for a hardtop. Do you guys buy parts?
Supreme Member
Joined: Sep 2005
Posts: 1,951
Likes: 13
From: Ottawa, ONT
Car: 1987 Firebird
Engine: 355
Transmission: T56
Looking for the following parts off of a 1987 Firebird. In the pictures, from left to right, and top to bottom in that order.
1) Circled in red, the "block off plate", looks like it can house 3 switches. Looking for 2 of those.
2) Circled in yellow, the switches themselves. Looking for 6 in total, must be functional switches, no matter what they are for. Can be for rear defrost, hatch, etc...
3) Circled in yellow, the whole plastic peice that houses the blockoff plate (drivers side).
4) Steering column cover, stretching from door to center console, tan in colour.
Looking for parts that are in decent condition, mine have been drilled into, so i need some without holes. Must be exact colour.

1) Circled in red, the "block off plate", looks like it can house 3 switches. Looking for 2 of those.
2) Circled in yellow, the switches themselves. Looking for 6 in total, must be functional switches, no matter what they are for. Can be for rear defrost, hatch, etc...
3) Circled in yellow, the whole plastic peice that houses the blockoff plate (drivers side).
4) Steering column cover, stretching from door to center console, tan in colour.
Looking for parts that are in decent condition, mine have been drilled into, so i need some without holes. Must be exact colour.

Supreme Member
iTrader: (21)
Joined: Dec 2005
Posts: 4,075
Likes: 1
Car: 04 Silverado
Engine: 4.8
Transmission: auto
Looking for the following parts off of a 1987 Firebird. In the pictures, from left to right, and top to bottom in that order.
1) Circled in red, the "block off plate", looks like it can house 3 switches. Looking for 2 of those.
2) Circled in yellow, the switches themselves. Looking for 6 in total, must be functional switches, no matter what they are for. Can be for rear defrost, hatch, etc...
3) Circled in yellow, the whole plastic peice that houses the blockoff plate (drivers side).
4) Steering column cover, stretching from door to center console, tan in colour.
Looking for parts that are in decent condition, mine have been drilled into, so i need some without holes. Must be exact colour.


1) Circled in red, the "block off plate", looks like it can house 3 switches. Looking for 2 of those.
2) Circled in yellow, the switches themselves. Looking for 6 in total, must be functional switches, no matter what they are for. Can be for rear defrost, hatch, etc...
3) Circled in yellow, the whole plastic peice that houses the blockoff plate (drivers side).
4) Steering column cover, stretching from door to center console, tan in colour.
Looking for parts that are in decent condition, mine have been drilled into, so i need some without holes. Must be exact colour.


Senior Member
iTrader: (3)
Joined: Jul 1999
Posts: 816
Likes: 0
From: Mechanicsburg, PA
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
How much for the overhead plasitc on the B pillar. And also how much for the partially complete overhead console?
Supreme Member
Joined: Sep 2005
Posts: 1,951
Likes: 13
From: Ottawa, ONT
Car: 1987 Firebird
Engine: 355
Transmission: T56
Wow, talk about service! That was quick!!!!! Could you give me an idea on pricing before you go ahead an dig those out??? Im not gonna get a chance to go junkyarding until the spring but i figure these parts are pretty cheap. As well, i live in ottawa canada, so a quote for shipping would be great too if i am to pay. K1B4P3 Thanks.
Thread Starter
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Wow, talk about service! That was quick!!!!! Could you give me an idea on pricing before you go ahead an dig those out??? Im not gonna get a chance to go junkyarding until the spring but i figure these parts are pretty cheap. As well, i live in ottawa canada, so a quote for shipping would be great too if i am to pay. K1B4P3 Thanks.
Junior Member
iTrader: (1)
Joined: Sep 2006
Posts: 49
Likes: 0
From: Ontario, Canada
Car: 1988 GTA
Engine: 5.7L
Transmission: 700R4
INTERIOR SWAP....need some help
I have an 88 GTA that I want to change from a biege interior to a charcoal/grey/black interior. So I need; carpet, seats, seat belts, headliner, door panels, sail panels, kick plates, seatbelt guides...I need everything. I also want to get rid of my digital dash and put in an analog instrument cluster (is this a plug and play swap or is it more involved than that?). PM me with pricing/availability, thanks
Senior Member
Joined: Oct 2005
Posts: 782
Likes: 0
From: Troy,NY
Car: 1989 camaro rs
Engine: 305 TBI
Transmission: 700r
1989 front and back grey crapet set
grey matching kick panels with the crapet attached
with bolt on rear hatch thats grey
un crack auto shift bazel (sp?)with screws (lost my screws kind just held on with tap right now)
driver side female end buckle
a consol with grey carpet attached to it dont necc need all the attchments but would not hurt
89's top seat belt covers
got some black t-top shades with good fabric?
you can email me at TuftsOrders@gmail.com if i dont get back to her i usaly surf here dialy but miss things of intrest alot
possiable some 3.73 gears (i know that dont go here but i dont wanna make another post heh)
grey matching kick panels with the crapet attached
with bolt on rear hatch thats grey
un crack auto shift bazel (sp?)with screws (lost my screws kind just held on with tap right now)
driver side female end buckle
a consol with grey carpet attached to it dont necc need all the attchments but would not hurt
89's top seat belt covers
got some black t-top shades with good fabric?
you can email me at TuftsOrders@gmail.com if i dont get back to her i usaly surf here dialy but miss things of intrest alot
possiable some 3.73 gears (i know that dont go here but i dont wanna make another post heh)
Last edited by Jtufts; Jan 3, 2007 at 04:02 PM.
Supreme Member
iTrader: (21)
Joined: Dec 2005
Posts: 4,075
Likes: 1
Car: 04 Silverado
Engine: 4.8
Transmission: auto
Supreme Member
Joined: Aug 2002
Posts: 2,134
Likes: 1
From: Washington state
Car: 87 Irocz, 95 Z28, 71 Z28 /RS
Engine: 355 Tpi, LT1, 355
Transmission: Auto, Auto, 4sp
Any vert parts?
Looking for carpet (black) both front & trunk area
Black paneling
Also need the peice that goes up by the windshield thats plastic the handles swing in to it.
Looking for carpet (black) both front & trunk area
Black paneling
Also need the peice that goes up by the windshield thats plastic the handles swing in to it.
Supreme Member
iTrader: (21)
Joined: Dec 2005
Posts: 4,075
Likes: 1
Car: 04 Silverado
Engine: 4.8
Transmission: auto
Supreme Member
Joined: Aug 2002
Posts: 2,134
Likes: 1
From: Washington state
Car: 87 Irocz, 95 Z28, 71 Z28 /RS
Engine: 355 Tpi, LT1, 355
Transmission: Auto, Auto, 4sp
MY ROC gets ALL new parts come this spring.
Supreme Member
Joined: Aug 2002
Posts: 2,134
Likes: 1
From: Washington state
Car: 87 Irocz, 95 Z28, 71 Z28 /RS
Engine: 355 Tpi, LT1, 355
Transmission: Auto, Auto, 4sp
Dont know yet lol looking at buying the kits that come with the ASB (???) headliner, sun visors, sail panels & something else If I remember right.
Right now I am just worried about getting the engine put back together, & back in the car then getting the car running.
Right now I am just worried about getting the engine put back together, & back in the car then getting the car running.
i have a 91 firebird 3.1 lt. non t top power truck latch. ..... i need alot of help. k to start with i need a trunk latch and the cover for it.. i need a key for the trunk not importent though. i need a dimmer switch, and a power antenna and if at all possible can someone tell me how to remove the center arm rest where the the gears are and the compartment thanks awhole lot PM me so i get an email thanks





