Asking for an opinion
Thread Starter
Junior Member
Joined: Jun 2007
Posts: 48
Likes: 0
From: South Texas
Car: 1982 Indy 500 Pace Car Replica
Engine: Stroked 350 (385ci) TPIS Mini-Ram
Transmission: 6-speed
Axle/Gears: Stock w/Disks and 4.10's
Asking for an opinion
Hey Guys,
Thinking about doing the following combo for my 82 camaro. I want your opinion.
For starters 18" replica IROC wheels. 18x8 fronts and 18x10 in rear. The 18x8's will need to be widened 2".

The tires I want to use are M/T Sportsman S/R

Front Size will be 26X10.00R18LT and the rears will be 28X12.00R18LT.
I want to paint the rims to match my car.


Can this combo work as I have described?
Thanks in advance,
Thinking about doing the following combo for my 82 camaro. I want your opinion.
For starters 18" replica IROC wheels. 18x8 fronts and 18x10 in rear. The 18x8's will need to be widened 2".

The tires I want to use are M/T Sportsman S/R

Front Size will be 26X10.00R18LT and the rears will be 28X12.00R18LT.
I want to paint the rims to match my car.


Can this combo work as I have described?
Thanks in advance,
Supreme Member
Joined: May 2006
Posts: 1,857
Likes: 0
From: Maui, Hawaii
Car: 1984 Trans Am
Engine: broken 385sbc
Transmission: G-Force rebuilt T-5
Axle/Gears: Currie 9" Ford 4.30:1
Re: Asking for an opinion
ok, it can work.. dont see why it wouldnt.. it must be me, but thats the only question i see.. i'm assuming its not gonna be the chrome rim?? just a painted/powder coated look with the strips painted the car color?? and make sure you can fit the rim under there.. backspacing, backspacing, backspacing... and offset
Supreme Member

Joined: Jul 2003
Posts: 2,779
Likes: 2
From: any clime or place...
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
Re: Asking for an opinion
sounds pretty good, i'd prolly go with 17s, but thats just me.
is it a DD with those MT's? don't think they'd last long in that scenario, but they sure do look sharp!
is it a DD with those MT's? don't think they'd last long in that scenario, but they sure do look sharp!
Senior Member
iTrader: (4)
Joined: Sep 2003
Posts: 900
Likes: 0
From: N. CA
Car: '85 TA
Engine: Aluminum Fuelie
Transmission: Mother of All Manuals
Re: Asking for an opinion
What do you mean the fronts will need to be widened 2"? Also, you might have some problems with those rears depending on the b.s. you use. I had to do some inner fender work to get my 17x10s to sit nicely. It all depends on how much you want the wheel to stick out of the wheel well (I didn't want mine to stick out at all).
Thread Starter
Junior Member
Joined: Jun 2007
Posts: 48
Likes: 0
From: South Texas
Car: 1982 Indy 500 Pace Car Replica
Engine: Stroked 350 (385ci) TPIS Mini-Ram
Transmission: 6-speed
Axle/Gears: Stock w/Disks and 4.10's
Re: Asking for an opinion
Thanks TA,
I would go with the 17"s but the M/T S/R's don't come in 17"s. and I like the tread pattern. I have installed a set of E/T Streets 28x11.5-16's on the stock front IROC wheel with no rubbing after a small massaging. I know I will need a spacer for the rears to clear. Yes I plan on getting a set of non-chrome rims if possible.
I drive the car less than 10k a year. Mainly going for a cool look that is stock appearing and matches the car. I plan on keeping the stock ride height. I have the 16's for the track / strip. What other tires have an aggressive tread pattern?
Thanks again,
Oscar
Edit: Only the rears will be widened.. I don't want them to sticck out at all. SuperKev do you have some pics of your 17x10's. What back spacing and tire do you have?
Thanks
I would go with the 17"s but the M/T S/R's don't come in 17"s. and I like the tread pattern. I have installed a set of E/T Streets 28x11.5-16's on the stock front IROC wheel with no rubbing after a small massaging. I know I will need a spacer for the rears to clear. Yes I plan on getting a set of non-chrome rims if possible.
I drive the car less than 10k a year. Mainly going for a cool look that is stock appearing and matches the car. I plan on keeping the stock ride height. I have the 16's for the track / strip. What other tires have an aggressive tread pattern?
Thanks again,
Oscar
Edit: Only the rears will be widened.. I don't want them to sticck out at all. SuperKev do you have some pics of your 17x10's. What back spacing and tire do you have?
Thanks
Last edited by 82 Indy Z; Jul 30, 2007 at 08:47 AM. Reason: addition
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
May 17, 2020 10:44 AM
LiquidBlue
Wheels and Tires
32
Dec 10, 2019 04:06 PM
skinny z
Engine/Drivetrain/Suspension Parts for Sale
5
Oct 5, 2015 06:23 PM





