bmw gts rims fit?
Thread Starter
Member
Joined: Aug 2010
Posts: 115
Likes: 1
Car: 91 Camaro RS
Engine: 5.7 350 TBI
Transmission: t56
Axle/Gears: 4.10
Joined: Aug 2006
Posts: 12,812
Likes: 109
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: bmw gts rims fit?
you will need a 35mm spacer.
our cars use a 120.65mm bolt pattern, those wheels are 120mm. They will bolt on, but are a hair off. That bolt pattern is used by quite a few people here with no issues.
FWIW, since you need the spacer, maybe you could find the proper adapter to convert back to the more proper 120.65 pattern
our cars use a 120.65mm bolt pattern, those wheels are 120mm. They will bolt on, but are a hair off. That bolt pattern is used by quite a few people here with no issues.
FWIW, since you need the spacer, maybe you could find the proper adapter to convert back to the more proper 120.65 pattern
Member
iTrader: (1)
Joined: Aug 2010
Posts: 171
Likes: 0
From: Charlotte, MI
Car: 86 sport coupe
Engine: 355
Transmission: 5speed
Axle/Gears: 3.73 detroit locker
Re: bmw gts rims fit?
Those look nice. I have BMW bolt pattern wheels on mine. They are giovanna gionelles 17x8 with about 5 and 3/4" backspace. I used 1.25" adapters to make up for the difference in backspace. I have 245/45/17 front and 255/50/17 rear federal 595 tires. They bolt on fine with no vibration. Just make sure you torque them correct in a star pattern.
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Power Adders
634
Apr 30, 2019 12:14 PM
Djmathis123
Auto Detailing and Appearance
11
Sep 29, 2015 01:36 AM
