40 mm offset 5.71 backspace 17 inch rims
Member
Joined: Aug 2013
Posts: 390
Likes: 0
From: Milltown, NJ
Car: 86 iroc, 02 v6 camaro
Engine: 350 HSR, 3800 V6
Transmission: T56, WCT5
Axle/Gears: 9in 4.11 posi, 3.23 LSD
Re: 40 mm offset 5.71 backspace 17 inch rims
yea you need a 2in spacer.. any wheel with a 0 offset and less than or equal to 9.5in wide will work on a thirdgen.
let me guess they are 4th gen wheels right? probably of the zr1/z06 variant?
let me guess they are 4th gen wheels right? probably of the zr1/z06 variant?
Thread Starter
Junior Member
Joined: Mar 2013
Posts: 37
Likes: 0
Re: 40 mm offset 5.71 backspace 17 inch rims
no the rims are from tire rack i had them on a different car . so a 2 inch spacer all the way around will work? the back will stick out more a little ?
Member
Joined: Aug 2013
Posts: 390
Likes: 0
From: Milltown, NJ
Car: 86 iroc, 02 v6 camaro
Engine: 350 HSR, 3800 V6
Transmission: T56, WCT5
Axle/Gears: 9in 4.11 posi, 3.23 LSD
Re: 40 mm offset 5.71 backspace 17 inch rims
they will be equal, a 2in is what you would need, they will stick out 1/4-1/2 further than stock
Supreme Member
Joined: Jul 1999
Posts: 2,755
Likes: 10
From: Ahead of you...
Car: 1984 LG4 Camaro
Engine: 350 Roller Motor
Transmission: Level 10 700R4
Axle/Gears: Strange 12 bolt 3.42
Re: 40 mm offset 5.71 backspace 17 inch rims
It would really help to know how wide they are...
Joined: Aug 2006
Posts: 12,805
Likes: 107
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: 40 mm offset 5.71 backspace 17 inch rims
They seem to be a wheel thats 8.28" wide, Probably called a 17x7.5 I would guess. You would want a 40mm or slightly thucker spacer if thats the correct width. A 2" spacer would work ok.
Thread
Thread Starter
Forum
Replies
Last Post