20 in rims
Thread Starter
Junior Member
Joined: May 2013
Posts: 43
Likes: 0
From: covina ca
Car: 1982 Z28
Engine: 350 880 block
Transmission: 700r4
20 in rims
hey got a question i have a set of 20in rims off of my wife dodge eagle vision
how can i get them to fit my 1982 z28 i am restoring
how can i get them to fit my 1982 z28 i am restoring
Senior Member
iTrader: (1)
Joined: Mar 2012
Posts: 574
Likes: 8
From: Georgia
Car: 91' Z28. 70' Dune Buggy
Engine: LSX Cam/Full Bolt ons
Transmission: T56
Axle/Gears: 4.10
Re: 20 in rims
^^Don't post unless you give reasons to support your posts. Without supporting reasons, it makes your post seem not credible.
KenJames, most likely you will have to use adapters. They bolt to the existing studs, and allow you to space out the wheels and/or change the bolt pattern. Adapters are common for aftermarket wheels.
You will need to test fit the wheels first without the adapters. If the wheels sit inside the fender, you might be able to get them to work. If the wheels stick outside the fender, you can't properly run them. The suspension won't be able to articulate. Let us know this and we can further help you.
KenJames, most likely you will have to use adapters. They bolt to the existing studs, and allow you to space out the wheels and/or change the bolt pattern. Adapters are common for aftermarket wheels.
You will need to test fit the wheels first without the adapters. If the wheels sit inside the fender, you might be able to get them to work. If the wheels stick outside the fender, you can't properly run them. The suspension won't be able to articulate. Let us know this and we can further help you.
Thread
Thread Starter
Forum
Replies
Last Post
LiquidBlue
Wheels and Tires
32
Dec 10, 2019 04:06 PM