Third Generation F-Body Message Boards
0 2019/05/27 19:03:13
July 1989 Mt. Washington New Hampshire.
July 1989 Mt. Washington New Hampshire.
0 2019/06/12 18:48:45
0 2019/06/12 18:53:44
0 2019/06/12 18:53:48
Spoiler gab
Spoiler gab
0 2019/06/17 19:33:43
0 2019/06/17 19:34:45
0 2019/08/20 19:38:34
There is a what felt like a tar paper seal covering the bolts for the bottom hinge on the passenger side. What is this called please?
There is a what felt like a tar paper seal covering the bolts for the bottom hinge on the passenger side. What is this called please?
0 2019/08/20 19:39:40
There are 3 rubber plugs on the bottom of each door. What are they called and can I find them?
There are 3 rubber plugs on the bottom of each door. What are they called and can I find them?
1 2019/08/20 19:39:41
When I took the the door external handle off, the nut on the left has a rubber insert. This is missing on 2 of the 4 nuts when I removed the handles. The rubber part on the right is I dont know what. This same part on the drivers door is in bad shape. Not sure where it goes. HELP!
When I took the the door external handle off, the nut on the left has a rubber insert. This is missing on 2 of the 4 nuts when I removed the handles. The rubber part on the right is I dont know what. This same part on the drivers door is in bad shape. Not sure where it goes. HELP!
0 2019/08/20 19:39:42
Asked about these before. they are from the front and I am told use
Asked about these before. they are from the front and I am told use
0 2019/08/20 19:39:43
0 2019/09/07 19:04:52
0 2019/09/07 19:04:53
Sanded to metal and preparing for epoxy coat
Sanded to metal and preparing for epoxy coat
0 2019/09/14 20:43:14
Here is the bar that goes between the t-tops. It was wrapped, not painted. So I removed nthe wrap and recovered it.
Here is the bar that goes between the t-tops. It was wrapped, not painted. So I removed nthe wrap and recovered it.
0 2019/09/14 20:43:21
0 2019/09/14 20:43:30
0 2019/09/14 20:43:38
0 2019/09/14 20:43:48
0 2019/09/15 19:39:38
These are whats screwed into for the front turn/parking light housings. mine all falling apart. Would like to use the same thing.
These are whats screwed into for the front turn/parking light housings. mine all falling apart. Would like to use the same thing.
0 2019/09/15 19:43:00
Drivers side. This broke off the metal bracket today. Would like the metal bracket and this piece attached. I dont need the small rubber seal on teh left side.
Drivers side. This broke off the metal bracket today. Would like the metal bracket and this piece attached. I dont need the small rubber seal on teh left side.
0 2019/09/29 15:13:45
Bolts for both font fenders near door on the bottom. For the passenger side if you can cut of the metal tab that the bolt screws into. I can weld it back on in the future. Either way I need the bolts at least for both sides.
Bolts for both font fenders near door on the bottom. For the passenger side if you can cut of the metal tab that the bolt screws into. I can weld it back on in the future. Either way I need the bolts at least for both sides.
0 2019/09/29 15:15:03
0 2019/10/08 09:28:44
0 2019/10/08 09:29:05
0 2019/10/21 12:52:01
looks like this, not sure if this is driver or passenger however
looks like this, not sure if this is driver or passenger however
0 2019/10/22 18:50:49
its part number 7 in this layout.
its part number 7 in this layout.
0 2019/10/22 18:50:50
This goes between the rear glass and metal trunk. There are 4 of them and I missing one.
This goes between the rear glass and metal trunk. There are 4 of them and I missing one.
0 2019/10/26 12:49:38
0 2020/04/05 10:18:43
0 2020/04/14 08:42:19
I went heavy on the paint and have some minor runs but they will sand out. Going to wet sand the orange peel tomorrow and buff it out so it will be done. Then I can do the same for the fenders and bumpers. Get this back together. More info and pics to come!
I went heavy on the paint and have some minor runs but they will sand out. Going to wet sand the orange peel tomorrow and buff it out so it will be done. Then I can do the same for the fenders and bumpers. Get this back together. More info and pics to come!
0 2020/08/19 05:53:47
The car has been sanded to 3k. Started in some spots with 1k, then 1500K then 3k
The car has been sanded to 3k. Started in some spots with 1k, then 1500K then 3k
0 2020/08/24 21:24:20
0 2020/08/24 21:24:21
Doors were done last year.
Doors were done last year.
0 2020/08/24 21:24:22
Drivers door panel.
Drivers door panel.
0 2020/08/29 19:34:44
I cleaned the the cloth on this passenger side panel. They cleaned up nice! Thanks to my trusty JEEP you see propping up the panel.
I cleaned the the cloth on this passenger side panel. They cleaned up nice! Thanks to my trusty JEEP you see propping up the panel.
0 2020/08/29 19:34:46
Here is the back of the passenger door panel. Look closely, you can see and assembly date, 7-16. that would be 1989. I go the car a week after that July. Pretty cool.
Here is the back of the passenger door panel. Look closely, you can see and assembly date, 7-16. that would be 1989. I go the car a week after that July. Pretty cool.
0 2020/08/29 19:34:47
0 2020/08/29 19:42:27
7mm self tapping screw about 5/8" or so long with washer.
7mm self tapping screw about 5/8" or so long with washer.
0 2020/09/01 06:24:05
So these are the JNC026 black 18x8 all around They have a +32 offset. I put a 1.5" adapter/spacers in front and 1" in the back, came out PERFECT! Could not be happier!
So these are the JNC026 black 18x8 all around They have a +32 offset. I put a 1.5" adapter/spacers in front and 1" in the back, came out PERFECT! Could not be happier!
0 2020/09/01 19:58:58