Third Generation F-Body Message Boards
The red circle is the area where its loose.
The red circle is the area where its loose.
0 2020/10/31 11:52:59
0 2020/09/27 07:58:40
0 2020/09/27 07:58:39
0 2020/09/27 07:58:38
The shaft seemed ok, no play in it, just this metal piece hanging
The shaft seemed ok, no play in it, just this metal piece hanging
0 2020/09/26 16:08:36
Some sort of clip breaking off the u joint. See below
Some sort of clip breaking off the u joint. See below
0 2020/09/26 16:08:34
I had to burn our the plastic pins. So they are original 31 years old. Burn out was pretty easy. But I cant get this stupid thing to press out.
I had to burn our the plastic pins. So they are original 31 years old. Burn out was pretty easy. But I cant get this stupid thing to press out.
0 2020/09/26 16:08:33
Here is the passenger side installed
Here is the passenger side installed
0 2020/09/20 13:44:02
Upon pulling and painting the inner plastic fender wells I found RUST. I hate RUST. So I cleaned it up, treated it with POR15 metal prep then paint. Just want it protected for now until I can get in there and fix.
Upon pulling and painting the inner plastic fender wells I found RUST. I hate RUST. So I cleaned it up, treated it with POR15 metal prep then paint. Just want it protected for now until I can get in there and fix.
0 2020/09/20 13:44:01
Just finished replacing the bearings on the rotor, both inner and outer. The passenger side was fine but I figured why not? Driver side was clunking whenever I made left turns. The rear seal failed and the inner bearing was the culprit.
Just finished replacing the bearings on the rotor, both inner and outer. The passenger side was fine but I figured why not? Driver side was clunking whenever I made left turns. The rear seal failed and the inner bearing was the culprit.
0 2020/09/20 13:44:00
So I cleaned up the inner fender wells and painted them, came out great!
So I cleaned up the inner fender wells and painted them, came out great!
0 2020/09/20 13:43:59
Its really coming together now!
Its really coming together now!
0 2020/09/16 08:03:10
Yes...very much so!
Yes...very much so!
0 2020/09/16 08:03:09
Alway loved the interior of the firebirds
Alway loved the interior of the firebirds
0 2020/09/16 08:03:07
slowly coming together
slowly coming together
0 2020/09/16 08:03:06
Installed a new glove box
Installed a new glove box
0 2020/09/16 08:03:05
simply awesome...as the day I bought it. 31 years ago.
simply awesome...as the day I bought it. 31 years ago.
0 2020/09/06 20:16:51
so happy I am driving this again...in BLACK!
so happy I am driving this again...in BLACK!
0 2020/09/06 20:16:50
and this stance!
and this stance!
0 2020/09/06 20:16:49
hello!!
hello!!
0 2020/09/06 20:16:47
I love this stance.
I love this stance.
0 2020/09/06 20:16:46
started on the interior. Still need a new headliner, update the carpet, fix the bowed out center console. and general clean up.
started on the interior. Still need a new headliner, update the carpet, fix the bowed out center console. and general clean up.
0 2020/09/06 20:16:45
very happy with this look
very happy with this look
0 2020/09/06 20:16:44
So the back is done
So the back is done
0 2020/09/06 20:16:43
0 2020/09/03 05:59:15
So these are the JNC026 black 18x8 all around They have a +32 offset. I put a 1.5" adapter/spacers in front and 1" in the back, came out PERFECT! Could not be happier!
So these are the JNC026 black 18x8 all around They have a +32 offset. I put a 1.5" adapter/spacers in front and 1" in the back, came out PERFECT! Could not be happier!
0 2020/09/01 19:58:58
7mm self tapping screw about 5/8" or so long with washer.
7mm self tapping screw about 5/8" or so long with washer.
0 2020/09/01 06:24:05
0 2020/08/29 19:42:27
Here is the back of the passenger door panel. Look closely, you can see and assembly date, 7-16. that would be 1989. I go the car a week after that July. Pretty cool.
Here is the back of the passenger door panel. Look closely, you can see and assembly date, 7-16. that would be 1989. I go the car a week after that July. Pretty cool.
0 2020/08/29 19:34:47
I cleaned the the cloth on this passenger side panel. They cleaned up nice! Thanks to my trusty JEEP you see propping up the panel.
I cleaned the the cloth on this passenger side panel. They cleaned up nice! Thanks to my trusty JEEP you see propping up the panel.
0 2020/08/29 19:34:46
Drivers door panel.
Drivers door panel.
0 2020/08/29 19:34:44
Doors were done last year.
Doors were done last year.
0 2020/08/24 21:24:22
0 2020/08/24 21:24:21
The car has been sanded to 3k. Started in some spots with 1k, then 1500K then 3k
The car has been sanded to 3k. Started in some spots with 1k, then 1500K then 3k
0 2020/08/24 21:24:20
I went heavy on the paint and have some minor runs but they will sand out. Going to wet sand the orange peel tomorrow and buff it out so it will be done. Then I can do the same for the fenders and bumpers. Get this back together. More info and pics to come!
I went heavy on the paint and have some minor runs but they will sand out. Going to wet sand the orange peel tomorrow and buff it out so it will be done. Then I can do the same for the fenders and bumpers. Get this back together. More info and pics to come!
0 2020/08/19 05:53:47
0 2020/04/14 08:42:19
0 2020/04/05 10:18:43
This goes between the rear glass and metal trunk. There are 4 of them and I missing one.
This goes between the rear glass and metal trunk. There are 4 of them and I missing one.
0 2019/10/26 12:49:38
its part number 7 in this layout.
its part number 7 in this layout.
0 2019/10/22 18:50:50
looks like this, not sure if this is driver or passenger however
looks like this, not sure if this is driver or passenger however
0 2019/10/22 18:50:49