Third Generation F-Body Message Boards
0 2022/11/16 11:57:45
0 2022/11/16 11:57:46
0 2023/04/15 12:46:26
0 2023/12/15 06:30:48
0 2024/05/06 09:34:16
0 2024/05/06 09:35:06
0 2024/05/06 09:35:09
0 2024/05/06 09:38:30
0 2024/05/06 09:39:15
0 2024/05/06 09:40:20
0 2024/05/06 09:42:12
0 2024/05/06 09:43:53
0 2024/05/06 09:46:18
0 2024/05/06 09:47:53
0 2024/05/06 09:48:27
0 2024/06/06 13:44:02
0 2024/06/06 13:44:05
0 2024/06/06 13:44:10
0 2024/09/29 09:14:34
0 2024/12/26 05:49:57
0 2024/12/26 05:51:19
0 2025/02/24 23:59:44
About an 1" thick aluminum Plate needs to be drilled for the correct bolting of the OEM throttlebody. Place the Adapter plate as low to the pro Flo flange as possible to provide hood clearance with the 48mm throttlebody.
About an 1" thick aluminum Plate needs to be drilled for the correct bolting of the OEM throttlebody. Place the Adapter plate as low to the pro Flo flange as possible to provide hood clearance with the 48mm throttlebody.
0 2025/02/25 00:02:16
0 2025/02/25 00:02:56
After drilling and tapping the adapter holes for the mounting of the body its critical to cut enough material off to provide the throttle blade movement and a smooth air transition. You can see where I was going to cut.
After drilling and tapping the adapter holes for the mounting of the body its critical to cut enough material off to provide the throttle blade movement and a smooth air transition. You can see where I was going to cut.
0 2025/02/25 00:03:18
0 2025/02/28 08:55:01
0 2025/02/28 08:56:00
0 2025/02/28 11:12:21
If you could take a look at this cam Card: This cam has no advance ground in, right? So to have an ivc of 38 I will need to advance it at the crank 2 or 4 degprees to get it in the range…?
If you could take a look at this cam Card: This cam has no advance ground in, right? So to have an ivc of 38 I will need to advance it at the crank 2 or 4 degprees to get it in the range…?
0 2025/03/01 12:16:10
0 2025/03/01 12:21:51
0 2025/06/19 08:59:46
0 2025/10/11 15:09:45
0 2025/10/11 15:09:48
0 2025/10/11 15:09:50
0 2026/03/22 01:48:01
0 2026/03/22 01:48:22