Third Generation F-Body Message Boards
Welded in strips at each contour change to try and maintain the original cross-section.
Welded in strips at each contour change to try and maintain the original cross-section.
0 2021/03/17 17:08:38
0 2021/03/17 17:10:34
0 2021/03/17 17:12:49
0 2021/03/17 17:14:17
0 2021/03/17 18:03:16
The school where my wife used to work was throwing out that little AV cart, works great to wheel the welder around on.
The school where my wife used to work was throwing out that little AV cart, works great to wheel the welder around on.
0 2021/03/18 12:32:08
Setting recommendations
Setting recommendations
0 2021/03/18 12:34:46
0 2021/03/18 13:04:40
If you zoom in you can see the tan colored plastic head on the cable from the solenoid which contacts the lock release.
If you zoom in you can see the tan colored plastic head on the cable from the solenoid which contacts the lock release.
0 2021/03/18 13:09:53
0 2021/03/18 13:12:14
All old adhesive removed
All old adhesive removed
0 2021/03/19 11:47:40
0 2021/03/19 11:48:47
0 2021/03/19 11:49:28
But this little wheel ate it up! I forget the name, but it removed the rest of the residue on contact.
But this little wheel ate it up! I forget the name, but it removed the rest of the residue on contact.
0 2021/03/19 11:53:13
0 2021/03/19 12:01:13
0 2021/03/19 12:01:48
0 2021/03/19 12:02:17
Inside looking out, is just like the recent no-glass view except for the mirror tab!
Inside looking out, is just like the recent no-glass view except for the mirror tab!
0 2021/03/19 12:02:55
0 2021/03/19 16:12:10
0 2021/03/19 16:12:49
Removed the console, et. al.
Removed the console, et. al.
0 2021/03/19 16:38:20
Wow, gauges look nice without the nasty oxidized plastic hiding them.
Wow, gauges look nice without the nasty oxidized plastic hiding them.
0 2021/03/19 16:39:26
0 2021/03/19 16:41:25
0 2021/03/19 16:43:17
I think I will re-use the horn button, it is original and looks pretty good.
I think I will re-use the horn button, it is original and looks pretty good.
0 2021/03/19 16:58:13
0 2021/03/19 16:59:34
Will probably paint the silver with that wrinkle black, to more closely resemble the old one. And I'm pretty sure my old horn button will work as well.
Will probably paint the silver with that wrinkle black, to more closely resemble the old one. And I'm pretty sure my old horn button will work as well.
0 2021/03/20 03:53:58
0 2021/03/20 17:55:15
Check out the ultra tiny torsional damper for the speedo needle, amazing!
Check out the ultra tiny torsional damper for the speedo needle, amazing!
0 2021/03/20 17:56:02
Also polished the plastic with rubbing compound and polishing compound.
Also polished the plastic with rubbing compound and polishing compound.
0 2021/03/20 18:03:09
0 2021/03/21 17:04:11
Tooling to hold plastic while trimming ID, was so afraid of cracking the whole shmear.
Tooling to hold plastic while trimming ID, was so afraid of cracking the whole shmear.
0 2021/03/21 17:04:51
So far so good!
So far so good!
0 2021/03/21 17:08:15
0 2021/03/21 17:12:13
Center-lines did not align
Center-lines did not align
0 2021/03/21 17:12:50
Nothing to lose
Nothing to lose
0 2021/03/21 17:15:37
0 2021/03/21 17:18:40
0 2021/03/21 17:23:56
0 2021/03/21 17:24:38
0 2021/03/21 17:25:12