Description:
My far from stock Mustang killer. SBC 355, performer Rpm heads, rpm air gap intake, holly 750 hp double pumper, scat crank,eagle H beam rods, Engle 1026hyd cam 292 der 508in/510 ext lift, Th350 with 3000 rpm stall, 355 posi out back, and 2 1/2 in flowmaster delta flow 40 series muffs fed by summit racing headers, we had to put a Harwood fiberglass hood with a 4in cowl for air cleaner to clear due to nitrous plate and spacers with intakes already high rise. But I think it still looks pretty good. Still havent ran with the squeeze just on the motor. Might not even hook the rest of the nitrous system up now. It dont really need it. This thing loves to rev. Got the car for 700. with blown 305. Just finished 355 freshen up and upgraded to the eddy heads. The heads woke this motor up. After running it on my buddies dyno found out gotta cam up now. Gonna have delta cams grind me up a solid lifter cam in 545 lift range with 292 dur. Also gonna put on a set of 1.6 full roller rockers. That should open the valves some more. Already went to track and ran low 11s. I love this car.