Third Generation F-Body Message Boards
0 2017/09/26 17:40:08
Had to remove the compressor when lowering the car.
Had to remove the compressor when lowering the car.
0 2017/09/26 17:40:24
Shows the shifter coming through the original hole.
Shows the shifter coming through the original hole.
0 2017/09/26 17:40:38
0 2017/09/26 17:40:55
Motor mounts worked great.
Motor mounts worked great.
0 2017/09/26 17:41:09
Both sides
Both sides
0 2017/09/26 17:41:23
this shows that the accessaries from a 95 Vette fit very nicely.
this shows that the accessaries from a 95 Vette fit very nicely.
0 2017/09/26 17:41:40
This shows the booster and master cylinder which is for the four wheel disc brakes.
This shows the booster and master cylinder which is for the four wheel disc brakes.
0 2017/10/26 12:56:39
This is the clutch master cylinder under the booster.
This is the clutch master cylinder under the booster.
0 2017/10/26 12:56:52
I tried to get a shot of the pedal assembly. Notice the notch in the steering column bracket. the 4th gen clutch pedal hit the bracket and we had to clearance it. No biggie.
I tried to get a shot of the pedal assembly. Notice the notch in the steering column bracket. the 4th gen clutch pedal hit the bracket and we had to clearance it. No biggie.
0 2017/10/26 12:57:06
more from under the dash
more from under the dash
0 2017/10/26 12:57:19
0 2019/03/14 05:11:30
shows the location of the clutch master cylinder.
shows the location of the clutch master cylinder.
0 2017/10/26 12:57:35
0 2019/03/14 05:28:18
0 2017/10/26 12:57:49
All clean and ready for HVAC install
All clean and ready for HVAC install
0 2019/03/14 06:04:19
Better view of the U-bolt that holds the master cylinder to the firewall.
Better view of the U-bolt that holds the master cylinder to the firewall.
0 2017/10/26 12:58:04
0 2019/03/14 06:10:30
I'm pointing at it with a small extension.
I'm pointing at it with a small extension.
0 2017/12/05 14:07:58
Step one fitting the bottom housing. Had to find all the correct bolts and nuts.
Step one fitting the bottom housing. Had to find all the correct bolts and nuts.
0 2019/03/14 06:11:53
0 2017/12/05 14:08:14
0 2019/03/14 06:11:59
The exchanger just slid right in.
The exchanger just slid right in.
0 2019/03/14 06:12:06
0 2018/02/28 07:20:05
0 2018/09/28 12:55:59
Ain't it pretty?
Ain't it pretty?
0 2019/03/14 06:12:11
The top of the housing fit perfectly.
The top of the housing fit perfectly.
0 2019/03/14 06:12:16
Now for the blower motor and expander
Now for the blower motor and expander
0 2019/03/14 06:12:22
This is the drawing of the sub frame connectors. It's a bolt on, but I think we'll probably do some welding once it's fully installed.
This is the drawing of the sub frame connectors. It's a bolt on, but I think we'll probably do some welding once it's fully installed.
0 2019/03/23 07:23:51
Here we are getting the drive train ready to slide under the Camaro
Here we are getting the drive train ready to slide under the Camaro
0 2019/05/21 14:08:31
Empty engine bay.
Empty engine bay.
0 2019/05/21 14:09:00
Here is a shot of the underside and you might be able to see the sub frame connectors
Here is a shot of the underside and you might be able to see the sub frame connectors
0 2019/05/21 14:09:11
Slid the drive train under.
Slid the drive train under.
0 2019/05/21 14:09:24
Getting ready to lower the car onto the K-member
Getting ready to lower the car onto the K-member
0 2019/05/21 14:09:35
Ready to lower the car.
Ready to lower the car.
0 2019/05/21 14:09:51
That looks about right
That looks about right
0 2019/05/21 14:10:00
Just in case you want to know about the jig we made to hold the drive train
Just in case you want to know about the jig we made to hold the drive train
0 2019/05/21 14:10:12
0 2019/05/21 14:10:22
0 2019/05/21 14:10:34
0 2019/05/21 14:10:46