Third Generation F-Body Message Boards
I had to re-position and test fit the plastic cup which fits around the door lever several times.
I had to re-position and test fit the plastic cup which fits around the door lever several times.
0 2016/05/17 22:52:12
another view of the work area
another view of the work area
0 2016/05/17 22:53:49
I had to test fit on the door with the plastic cup on
I had to test fit on the door with the plastic cup on
0 2016/05/17 22:54:43
Notice that the handle is low in the opening. It was rubbing and I had to remove and reposition the handle again.
Notice that the handle is low in the opening. It was rubbing and I had to remove and reposition the handle again.
0 2016/05/17 22:54:57
another shot of the door test fit.
another shot of the door test fit.
0 2016/05/17 22:55:36
Bending the rods was harder than expected and too several trys to get right with the door panel plastic insert in position
Bending the rods was harder than expected and too several trys to get right with the door panel plastic insert in position
0 2016/06/25 19:32:06
Mocking up metal filler plate for strength
Mocking up metal filler plate for strength
0 2016/06/25 19:32:47
Tack weld and position door handle lever
Tack weld and position door handle lever
0 2016/06/25 19:32:48
Lbe the rods
Lbe the rods
0 2016/06/25 19:33:31
Panel fitment was a chore. off and on several times. Problem was the rods fitting properly with the plastic cup which surronds the door lever
Panel fitment was a chore. off and on several times. Problem was the rods fitting properly with the plastic cup which surronds the door lever
0 2016/06/25 19:33:32
Panel with switches in looks nice and fits good
Panel with switches in looks nice and fits good
0 2016/06/25 19:33:34
I need to work on this angle but I feeel the third gen rubber wil most likely fill most of this space (Top of door)
I need to work on this angle but I feeel the third gen rubber wil most likely fill most of this space (Top of door)
0 2016/06/25 19:33:35
I still need to do the shroom foam mod to this top front portion of the door panel.
I still need to do the shroom foam mod to this top front portion of the door panel.
0 2016/06/25 19:45:06
Looking good with the 4th gen seats.
Looking good with the 4th gen seats.
0 2016/06/25 19:45:07
A close up of the trans am speakers. notice six speed shifter in foreground.
A close up of the trans am speakers. notice six speed shifter in foreground.
0 2016/06/25 19:45:29
0 2019/11/01 15:27:13