Third Generation F-Body Message Boards
Still no paint but this is the first nice body weve built, come on out and watch
Still no paint but this is the first nice body weve built, come on out and watch
0 2015/05/23 23:57:45
0 2015/05/25 21:09:34
0 2015/05/25 21:13:00
0 2015/05/25 21:18:10
0 2015/06/04 23:10:27
Just to get an idea.. the far left fitting is where im using the 150°
Just to get an idea.. the far left fitting is where im using the 150°
0 2015/06/04 23:22:12
Off the intake... tho ill be using a 90° turn back now that i realized how far the gauge would stick out
Off the intake... tho ill be using a 90° turn back now that i realized how far the gauge would stick out
0 2015/06/04 23:24:22
0 2015/06/06 23:11:00
0 2015/06/06 23:12:59
0 2015/06/06 23:13:41
0 2015/06/06 23:14:26
0 2015/06/06 23:16:42
0 2015/06/06 23:20:54
May be doing this if it wont affect the pressure at the rail.. the stock bracket that was on the wix filter fit pretty well just using the factory bracket bolt location
May be doing this if it wont affect the pressure at the rail.. the stock bracket that was on the wix filter fit pretty well just using the factory bracket bolt location
0 2015/06/06 23:21:49
0 2015/06/06 23:30:30
Love the look, any disadvantages in running -an instead of the hard lines?
Love the look, any disadvantages in running -an instead of the hard lines?
0 2015/06/06 23:31:28
For the russel fitting to work i cut off 3/4" and sanded it down close to .01"
For the russel fitting to work i cut off 3/4" and sanded it down close to .01"
0 2015/06/06 23:50:11
Too get the russel fitting to work on the return line i had to cut off 3/4" and sand down about .01"
Too get the russel fitting to work on the return line i had to cut off 3/4" and sand down about .01"
0 2015/06/06 23:52:51
To get the russel fitting to fit on the sending unit return line i had to cut it down 3/4" and sand away about .01".. not to bad
To get the russel fitting to fit on the sending unit return line i had to cut it down 3/4" and sand away about .01".. not to bad
0 2015/06/06 23:57:44
0 2015/06/07 00:00:34
The soft jaws were great to have, just wraped electrical tape where my mark was and used a very fine hack saw to cut it
The soft jaws were great to have, just wraped electrical tape where my mark was and used a very fine hack saw to cut it
0 2015/06/08 00:05:59
Cut pretty well
Cut pretty well
0 2015/06/08 00:07:47
Another cheap basterd trick, worked perfect tho.. not buyin a special wrench
Another cheap basterd trick, worked perfect tho.. not buyin a special wrench
0 2015/06/08 00:08:56
Decided on stock filter mount.. too easy
Decided on stock filter mount.. too easy
0 2015/06/08 00:11:30
Obviously measure but where my filter was happy my return line was 22.5" and feed was 20"
Obviously measure but where my filter was happy my return line was 22.5" and feed was 20"
0 2015/06/08 00:12:42
Where my filter was happy i ended up wit 20" for feed line and 22.5" for return
Where my filter was happy i ended up wit 20" for feed line and 22.5" for return
0 2015/06/08 00:15:14
When my filter was in its happy place i wound up with 20" feed and 22.5" return.. plus the fittings
When my filter was in its happy place i wound up with 20" feed and 22.5" return.. plus the fittings
0 2015/06/08 00:18:28
With my filter in its happy place i wound up with 20" for my feed and 22.5" for my return, before fittings
With my filter in its happy place i wound up with 20" for my feed and 22.5" for my return, before fittings
0 2015/06/08 00:21:16
With my filter in its happy place i wound up with 20" for my feed and 22.5" for my return before fittings
With my filter in its happy place i wound up with 20" for my feed and 22.5" for my return before fittings
0 2015/06/08 00:23:25
With my filter in its happy place i wound up with 20" for my feed and 22.5" for my return before fittings
With my filter in its happy place i wound up with 20" for my feed and 22.5" for my return before fittings
0 2015/06/08 00:25:29
0 2015/06/08 00:53:24
0 2015/06/08 00:53:53
0 2015/06/08 00:54:56
0 2015/06/08 00:55:20
0 2015/06/08 00:56:27
0 2015/06/08 00:56:59
0 2015/06/08 00:58:14
New plan same fittings really
New plan same fittings really
0 2015/06/08 01:25:50
0 2015/06/08 01:40:31
0 2015/06/08 01:43:14