Third Generation F-Body Message Boards
Nice quality and came with header bolts, gaskets and collector bolts
Nice quality and came with header bolts, gaskets and collector bolts
0 2015/06/08 01:47:30
Also found this guy laying around my cousins shop and got it for 50$.. perfect cuz my pan has 2 -10an fittings welded to it,
Also found this guy laying around my cousins shop and got it for 50$.. perfect cuz my pan has 2 -10an fittings welded to it,
0 2015/06/08 01:50:43
0 2015/06/08 02:08:26
0 2015/06/08 02:36:49
0 2015/06/08 02:37:08
Old set up.. tired of it, kind of tacky temporary cluster..
Old set up.. tired of it, kind of tacky temporary cluster..
0 2015/06/11 15:41:20
Old set up, traced from cardboard.. really want to use the stock bezel tho
Old set up, traced from cardboard.. really want to use the stock bezel tho
0 2015/06/11 15:45:47
Cobalts and sport comp II
Cobalts and sport comp II
0 2015/06/11 15:48:09
Used a dremel tool and slowly made the holes bigger, not much is needed
Used a dremel tool and slowly made the holes bigger, not much is needed
0 2015/06/11 15:49:53
0 2015/06/11 15:52:14
I already had the aluminium or id be doing this in cardboard
I already had the aluminium or id be doing this in cardboard
0 2015/06/11 15:53:43
0 2015/06/11 15:54:31
0 2015/06/11 15:55:38
My template
My template
0 2015/06/11 15:56:32
The plan from here is to cut this from very thin gaudge aluminium and glue it in place, then try to mimic the texture with some type of textured black paint
The plan from here is to cut this from very thin gaudge aluminium and glue it in place, then try to mimic the texture with some type of textured black paint
0 2015/06/11 15:57:09
0 2015/06/11 16:11:00
0 2015/06/11 16:12:24
0 2015/06/11 16:21:09
0 2015/06/11 16:22:44
0 2015/06/13 00:55:15
I used a piece of alluminium off a race car door i had hanging on the wall and cut it down with a dremel cut off wheel, then used a 1 7/8" holesaw bit and a dremel sanding disc to smoth it out and get the gauges to fit the holes
I used a piece of alluminium off a race car door i had hanging on the wall and cut it down with a dremel cut off wheel, then used a 1 7/8" holesaw bit and a dremel sanding disc to smoth it out and get the gauges to fit the holes
0 2015/06/13 00:55:46
0 2015/06/13 00:59:41
Not too bad for shit laying around.. ive never fiberglassed before but that would be the better way to do this
Not too bad for shit laying around.. ive never fiberglassed before but that would be the better way to do this
0 2015/06/13 01:00:09
Id say for just laying it on top it dosnt look to bad, after i match the bezel and go a little heavy around the edges youll hardly notice when its tucked back in its home
Id say for just laying it on top it dosnt look to bad, after i match the bezel and go a little heavy around the edges youll hardly notice when its tucked back in its home
0 2015/06/13 01:02:36
0 2015/06/13 17:24:10
0 2015/06/15 19:57:26
Dirty
Dirty
0 2015/06/15 19:57:44
0 2015/06/15 19:58:13
0 2015/06/23 01:41:57
0 2015/08/18 22:35:10
0 2015/08/18 22:35:32
0 2015/08/18 22:41:59
0 2015/08/18 22:42:18
0 2015/08/18 22:42:35
0 2015/08/18 22:43:09
0 2015/08/18 22:43:37
0 2015/08/18 22:44:29
0 2015/08/18 22:44:49
0 2015/08/18 22:45:11
0 2015/08/18 22:45:31