Third Generation F-Body Message Boards
0 2016/02/05 15:24:35
0 2016/02/05 15:29:43
0 2016/02/05 15:30:16
0 2016/02/05 15:30:18
0 2016/02/05 15:30:20
0 2016/02/06 19:26:04
0 2016/02/06 21:40:42
0 2016/02/11 06:53:26
0 2016/02/11 06:53:33
0 2016/02/11 21:16:50
0 2016/02/11 21:19:23
0 2016/02/12 23:19:46
0 2016/02/12 23:20:51
0 2016/02/13 17:44:29
Ash tray door tab is broken
Ash tray door tab is broken
0 2016/02/13 17:45:33
The main shop
The main shop
0 2016/04/25 22:17:26
Engine room/ supply
Engine room/ supply
0 2016/04/25 22:17:28
Body prep lean to.... Paint booth is outback
Body prep lean to.... Paint booth is outback
0 2016/04/25 22:17:31
0 2016/07/10 20:38:36
Ok so... Someone broke the truck, so some genius decided to pry out the key lock
Ok so... Someone broke the truck, so some genius decided to pry out the key lock
0 2016/07/10 20:44:22
After a new panels is welded in and primed, this was a bit tricky to make sure the key tumbler would se correctly
After a new panels is welded in and primed, this was a bit tricky to make sure the key tumbler would se correctly
0 2016/07/10 20:44:29
What a mess. The struts were done, the bushing in the A Arms are shot and all the bearings for the tie rod ends are spent. All is getting replaced.
What a mess. The struts were done, the bushing in the A Arms are shot and all the bearings for the tie rod ends are spent. All is getting replaced.
0 2016/07/10 20:44:44
All blasted.
All blasted.
0 2016/07/10 20:44:59
Prior to powder coating everything they gotta be blasted in the cabinet and bushing pressed out. I think I'm gonna go with all rubber instead of Poly.
Prior to powder coating everything they gotta be blasted in the cabinet and bushing pressed out. I think I'm gonna go with all rubber instead of Poly.
0 2016/07/10 20:45:34
Dust shields are getting powedercoated too, after they come out of the blasting cabinet
Dust shields are getting powedercoated too, after they come out of the blasting cabinet
0 2016/07/10 20:46:03
All cleaned up. Anyone doing a restoration, a nice blasting cabinet is PRICELESS!!!
All cleaned up. Anyone doing a restoration, a nice blasting cabinet is PRICELESS!!!
0 2016/07/10 20:46:18
Here is what we have now. Added the separation wall with entry door and window. Piped in air from the main shop, added 12 LED lights, 9000cfm fan, paneled the ceiling/ walls.
Here is what we have now. Added the separation wall with entry door and window. Piped in air from the main shop, added 12 LED lights, 9000cfm fan, paneled the ceiling/ walls.
0 2016/07/10 21:16:48
Its almost done.
Its almost done.
0 2016/07/10 21:16:52
The main door was there. Designed the ceiling filter bank to filter incoming air into the room and create a down-draft type booth. Its not state of the art but for around $1000 and some elbow grease I think I made a decent "at home" booth.
The main door was there. Designed the ceiling filter bank to filter incoming air into the room and create a down-draft type booth. Its not state of the art but for around $1000 and some elbow grease I think I made a decent "at home" booth.
0 2016/07/10 21:16:54
This is what I started with, a 26x20 room with concrete floor.
This is what I started with, a 26x20 room with concrete floor.
0 2016/07/10 21:17:02
Only one light outlet.
Only one light outlet.
0 2016/07/10 21:17:05
This is basically the finished product
This is basically the finished product
0 2016/07/10 21:22:39
12 LED lights, 9000cfm fan, piped in air with desiccant filtration, added a wall with entry door/ sight window
12 LED lights, 9000cfm fan, piped in air with desiccant filtration, added a wall with entry door/ sight window
0 2016/07/10 21:22:43
Down-Draft ceiling filter bank. They swing out of the ceiling to replace the filters.
Down-Draft ceiling filter bank. They swing out of the ceiling to replace the filters.
0 2016/07/10 21:22:48
This is what I started with
This is what I started with
0 2016/07/10 21:22:57
Single ceiling light and single outlet
Single ceiling light and single outlet
0 2016/07/10 21:23:00
0 2016/07/12 01:58:08
0 2016/07/12 01:58:12
0 2016/07/12 01:58:16
Out with the old...
Out with the old...
0 2016/12/07 20:40:57