Third Generation F-Body Message Boards
Holley unit with the magnum spacer under the mount.
Holley unit with the magnum spacer under the mount.
0 2020/02/13 15:14:20
This is about as much clearance as I can get with the fbody pan and UMI setup. Im running solid mounts so thisnshould suffice. Hard to see in the picture but I finally feel this is enough space.
This is about as much clearance as I can get with the fbody pan and UMI setup. Im running solid mounts so thisnshould suffice. Hard to see in the picture but I finally feel this is enough space.
0 2020/02/13 15:15:14
0 2020/02/13 15:20:50
0 2020/02/13 15:20:57
0 2020/02/13 15:21:05
VA unit as it sits in dash I will make new brackets since the ones they provide are flimsy.
VA unit as it sits in dash I will make new brackets since the ones they provide are flimsy.
0 2020/02/26 06:59:08
0 2020/02/26 06:59:11
Holes and ducts fabbed into the plenum.
Holes and ducts fabbed into the plenum.
0 2020/02/26 06:59:13
You can see the three main VA outlets and above it is the flat surface of the plenum I created. That is where I will place holes to connect the hose. They will be super short lengths.
You can see the three main VA outlets and above it is the flat surface of the plenum I created. That is where I will place holes to connect the hose. They will be super short lengths.
0 2020/02/26 06:59:15
Defrost outputs of the VA unit, plenty of room to run hose to the defrost plenums
Defrost outputs of the VA unit, plenty of room to run hose to the defrost plenums
0 2020/02/26 06:59:18
0 2020/03/10 16:38:19
0 2020/04/11 12:20:38
0 2020/04/11 12:35:13
0 2020/04/11 12:38:40
Offset LCA's do clear but I have no room around the panhard rod mount
Offset LCA's do clear but I have no room around the panhard rod mount
0 2020/04/17 09:10:56
View from the top. Tire is resting against the panhard mount on the inside.
View from the top. Tire is resting against the panhard mount on the inside.
0 2020/04/17 09:11:02
Side view (its sticking out more than the photo shows)
Side view (its sticking out more than the photo shows)
0 2020/04/17 09:11:08
Mocking up the Cup 2 tire
Mocking up the Cup 2 tire
0 2020/04/17 09:11:12
Deep tub.
Deep tub.
0 2020/04/17 09:11:15
0 2020/06/24 09:11:13
0 2020/06/24 16:18:56
0 2020/06/27 16:44:56
0 2020/06/27 16:45:34
Patch panel reusing the OEM gasket.
Patch panel reusing the OEM gasket.
0 2020/06/28 17:58:50
0 2020/06/28 17:59:31
Under dash AC lines.
Under dash AC lines.
0 2020/06/28 17:59:57
Dryer put in place.
Dryer put in place.
0 2020/06/28 18:00:16
0 2020/07/02 07:40:51
0 2020/07/03 06:53:15
0 2020/07/08 16:59:28
0 2020/07/08 16:59:30
0 2020/07/27 18:08:20
0 2020/08/13 11:36:18
0 2020/08/24 11:21:17
0 2020/09/24 08:50:57
0 2020/09/24 08:51:59
0 2020/10/15 06:14:11
Hawks Patch kit: HT-LS1ACPLATE
Hawks Patch kit: HT-LS1ACPLATE
0 2021/02/25 06:02:45
0 2021/02/25 06:10:19
Measurement Reference: Curtesy of Kwik Performance
Measurement Reference: Curtesy of Kwik Performance
0 2021/02/25 06:13:08