Third Generation F-Body Message Boards
0 2016/02/09 19:56:26
0 2016/02/09 19:56:28
0 2016/02/10 17:02:24
0 2016/02/16 21:12:41
0 2016/02/24 15:07:52
0 2016/02/24 15:07:56
0 2016/02/24 15:07:58
0 2016/02/24 15:08:05
0 2016/02/24 15:08:07
0 2016/02/24 15:08:10
0 2016/02/24 15:08:15
0 2016/02/24 15:08:18
0 2016/02/24 15:08:23
0 2016/02/24 15:08:28
0 2016/02/25 21:17:34
0 2016/02/25 21:17:40
0 2016/02/25 21:17:45
0 2016/03/09 20:50:21
0 2016/03/09 20:50:28
0 2016/03/09 20:50:36
0 2016/03/09 20:50:40
0 2016/03/10 13:32:25
0 2016/03/10 13:32:33
It drops the frame mount over 2" by looking at the pic.
It drops the frame mount over 2" by looking at the pic.
0 2016/03/10 13:32:38
0 2016/03/10 13:32:41
This was before the last hole was used. It's now basically level but will know more after its on the ground and everything settles.
This was before the last hole was used. It's now basically level but will know more after its on the ground and everything settles.
0 2016/03/10 13:32:46
The 135* wires clear the header primaries without any issues. Had to return my summit wires and a lot of sets won't clear.
The 135* wires clear the header primaries without any issues. Had to return my summit wires and a lot of sets won't clear.
0 2016/03/16 21:16:11
Rubber sealing lip inside coil wire cutouts to keep rubbing and arcing to a minimum. They push down on the coil wires significantly.
Rubber sealing lip inside coil wire cutouts to keep rubbing and arcing to a minimum. They push down on the coil wires significantly.
0 2016/03/16 21:16:24
0 2016/03/16 21:16:27
0 2016/03/16 21:16:31
0 2016/03/18 11:57:09
0 2016/03/18 11:57:14
0 2016/03/18 11:57:19
Suspension needs to settle still but I think judging by last summer and these weight jacks that it should settle another 1/2-1" after a quick drive.
Suspension needs to settle still but I think judging by last summer and these weight jacks that it should settle another 1/2-1" after a quick drive.
0 2016/03/23 20:25:26
0 2016/03/23 20:25:33
0 2016/05/06 21:34:35
With custom text saying LS1
With custom text saying LS1
0 2016/05/10 06:19:48
I run a 4" glasstek bolt on cowl hood. It's easier to wrap the hood sides than the cowl, no paint for me as I just shot the car with new dark charcoal metallic and won't paint on it. Decals or dip only.
I run a 4" glasstek bolt on cowl hood. It's easier to wrap the hood sides than the cowl, no paint for me as I just shot the car with new dark charcoal metallic and won't paint on it. Decals or dip only.
0 2016/05/10 06:19:54
0 2016/05/10 20:30:17
0 2016/05/10 20:30:22