Third Generation F-Body Message Boards
0 2016/06/03 18:47:29
0 2016/06/03 18:47:33
Intercooler sits 1.5" lower than stock rad location as does the trans cooler and rad.
Intercooler sits 1.5" lower than stock rad location as does the trans cooler and rad.
0 2016/06/05 10:46:25
BOV location above pass battery tray, brass fitting in the left of the BOV is the pre TB meth nozzle next to the 1/8" not plugged bung.
BOV location above pass battery tray, brass fitting in the left of the BOV is the pre TB meth nozzle next to the 1/8" not plugged bung.
0 2016/06/05 10:46:31
Pre supercharger nozzle 100cc
Pre supercharger nozzle 100cc
0 2016/06/05 10:46:37
Whole setup at the show. U can see the BOV and meth nozzle almost mounted directly across from each other by the whiper fluid tank. These were pre welded bungs and I just used what worked.
Whole setup at the show. U can see the BOV and meth nozzle almost mounted directly across from each other by the whiper fluid tank. These were pre welded bungs and I just used what worked.
0 2016/06/05 10:46:52
Better pic of inlet filter at driver firewall.
Better pic of inlet filter at driver firewall.
0 2016/06/05 10:57:33
0 2016/06/05 14:50:55
0 2016/06/05 15:35:27
0 2016/06/06 08:42:23
0 2016/06/06 08:42:31
0 2016/06/06 08:42:37
Here's the white marking inside of the SC inlet pipe which shows the meth spray marking.
Here's the white marking inside of the SC inlet pipe which shows the meth spray marking.
0 2016/06/07 19:52:42
New hest shield for SC inlet piping.
New hest shield for SC inlet piping.
0 2016/06/07 19:52:47
Black is old 1/2" spacer with crappy paper gasket. New one is billet 1" with OEM oring style gasket. It's the only one I could find with the OEM style gasket. Plus it's thick enough for me to drill and tap for meth nozzle.
Black is old 1/2" spacer with crappy paper gasket. New one is billet 1" with OEM oring style gasket. It's the only one I could find with the OEM style gasket. Plus it's thick enough for me to drill and tap for meth nozzle.
0 2016/06/07 19:52:54
Old black spacer thickness. You can see how the black spacer actually pushed the step inside the intake this decreasing the actual TB opening size and intake opening size. Not a fan of that either.
Old black spacer thickness. You can see how the black spacer actually pushed the step inside the intake this decreasing the actual TB opening size and intake opening size. Not a fan of that either.
0 2016/06/07 19:52:58
Open cage IAT looking inside the TB opening. It's actually in the recess of the intake air path so it might not ever get "wet" with the meth injection.
Open cage IAT looking inside the TB opening. It's actually in the recess of the intake air path so it might not ever get "wet" with the meth injection.
0 2016/06/07 19:53:04
IAT located in billet EGR block off plate right behind TB.
IAT located in billet EGR block off plate right behind TB.
0 2016/06/07 19:53:11
New spacer and bracket adjusters mocking it all up so I can figure out nozzle location. Either going on the driver side tight next to alt (might have to use the shorter non check valve nozzle for clearance) or on the underside. But the underside is much thicker and I want to make sure the nozzle gets a good spray pattern.
New spacer and bracket adjusters mocking it all up so I can figure out nozzle location. Either going on the driver side tight next to alt (might have to use the shorter non check valve nozzle for clearance) or on the underside. But the underside is much thicker and I want to make sure the nozzle gets a good spray pattern.
0 2016/06/07 19:53:15
White mark SC inlet from meth pre SC.
White mark SC inlet from meth pre SC.
0 2016/06/07 20:12:19
New hest shield for SC inlet pipe
New hest shield for SC inlet pipe
0 2016/06/07 20:12:23
New billet spacer vs plastic black one which was only 1/2" thick.
New billet spacer vs plastic black one which was only 1/2" thick.
0 2016/06/07 20:12:27
Black one also had a step that fit inside intake opening which decreased TB opening size... No good.
Black one also had a step that fit inside intake opening which decreased TB opening size... No good.
0 2016/06/07 20:12:31
IAT location looking inside TB opening. Open cage style and sits in recess of airflow path so it might not get "wet" from meth injection and skew readings.
IAT location looking inside TB opening. Open cage style and sits in recess of airflow path so it might not get "wet" from meth injection and skew readings.
0 2016/06/07 20:12:37
EGR block off plate with IAT sensor installed.
EGR block off plate with IAT sensor installed.
0 2016/06/07 20:12:42
New spacer mockup and IAT location. Figuring out nozzle placement for drilling and tapping. It's tight.
New spacer mockup and IAT location. Figuring out nozzle placement for drilling and tapping. It's tight.
0 2016/06/07 20:12:47
0 2016/06/07 20:19:03
0 2016/06/07 20:19:08
0 2016/06/07 20:19:16
0 2016/06/07 20:19:21
0 2016/06/07 20:19:30
0 2016/06/08 20:25:15
0 2016/06/08 20:25:20
0 2016/06/14 14:10:55
0 2016/06/14 14:10:59
0 2016/06/14 14:11:02
Close up of the BAER black label 13" setup, love them! Esp with a hydroboost!
Close up of the BAER black label 13" setup, love them! Esp with a hydroboost!
0 2016/06/15 21:30:10
For those wondering what ground clearance was with SS long tubes, dual 3" into single 4" over axle with dual mufflers and lowered. I honestly couldn't scrape it if I wanted too lol
For those wondering what ground clearance was with SS long tubes, dual 3" into single 4" over axle with dual mufflers and lowered. I honestly couldn't scrape it if I wanted too lol
0 2016/06/15 21:30:17
Side shot of exhaust. U can see the Asa's collectors in the left. They are the lowest part of the whole exhaust and everything tucked up higher than stock. This is with a driveshaft safety loop.
Side shot of exhaust. U can see the Asa's collectors in the left. They are the lowest part of the whole exhaust and everything tucked up higher than stock. This is with a driveshaft safety loop.
0 2016/06/15 21:30:27
Another one. Trans pan is next lowest part.
Another one. Trans pan is next lowest part.
0 2016/06/15 21:30:37