Third Generation F-Body Message Boards
I got torque management working beautifully on my Dominator ecu. Anything that will make my expensive transmission last longer I'm all for it.
I got torque management working beautifully on my Dominator ecu. Anything that will make my expensive transmission last longer I'm all for it.
0 2024/05/22 19:32:37
New inserts installed. Still have another set which I may take to a machine shop to have them make out of aluminum
New inserts installed. Still have another set which I may take to a machine shop to have them make out of aluminum
0 2024/05/22 19:32:25
Heat with this setup has been a little difficult to deal with. Found this melted when I pulled everything to get coated
Heat with this setup has been a little difficult to deal with. Found this melted when I pulled everything to get coated
0 2024/05/22 19:32:10
Moved intercooler into this spot because it's what I should have done the first time around.
Moved intercooler into this spot because it's what I should have done the first time around.
0 2024/05/22 19:11:27
Shortened the Hooker crossover by cutting flanges off and gluing new ones on. Pretty simple. Added a Moroso deep pan for my 4L80e.
Shortened the Hooker crossover by cutting flanges off and gluing new ones on. Pretty simple. Added a Moroso deep pan for my 4L80e.
0 2024/05/22 19:11:12
Driver side of things
Driver side of things
0 2024/05/22 19:10:50
Had the manifolds, turbine housing and turbo mount ceramic coated in Cerakote glacier black.
Had the manifolds, turbine housing and turbo mount ceramic coated in Cerakote glacier black.
0 2024/05/22 19:10:35
New alternator ad244 and ICT Billet bracket. The motion raceworks 3.5" pulley was too big at idle I'm now using a Hawks 2.85" pulley.
New alternator ad244 and ICT Billet bracket. The motion raceworks 3.5" pulley was too big at idle I'm now using a Hawks 2.85" pulley.
0 2024/05/22 19:10:15
Thirsty girl drinking that 94. But I'm now on 91 and spraying 1000cc 50/50 water/meth
Thirsty girl drinking that 94. But I'm now on 91 and spraying 1000cc 50/50 water/meth
0 2024/05/22 19:10:02
Added some UMI caster/camber plates
Added some UMI caster/camber plates
0 2024/05/22 19:09:53
Turbo blanket from Black Sheep Industries keeps the heat in that turbo!
Turbo blanket from Black Sheep Industries keeps the heat in that turbo!
0 2024/05/22 19:09:42
New radiator and fan combo looking mint!
New radiator and fan combo looking mint!
0 2024/05/22 19:08:54
0 2024/02/16 15:51:00
0 2024/02/16 15:50:51
0 2024/02/16 15:50:32
0 2023/12/06 08:01:07
0 2023/11/06 17:44:03
0 2022/11/02 00:02:43
0 2022/11/02 00:02:38
0 2022/11/02 00:02:32
0 2022/11/02 00:02:26
0 2022/11/02 00:02:20
0 2022/11/02 00:02:15
0 2022/11/02 00:02:10
0 2022/11/02 00:02:03
New shoes for to put it to the ground. 275/40-17
New shoes for to put it to the ground. 275/40-17
0 2022/11/01 23:37:15
On car adjustable panhard bar. Founders performance
On car adjustable panhard bar. Founders performance
0 2022/11/01 23:37:11
Another shot of the torque arm and chromoly driveshaft
Another shot of the torque arm and chromoly driveshaft
0 2022/11/01 23:37:06
Shot of the torque arm clearance after I got it bolted in and onto jack stands. Centered up nicely
Shot of the torque arm clearance after I got it bolted in and onto jack stands. Centered up nicely
0 2022/11/01 23:37:00
Got it slid under the car and lifted onto my floor jack. Nice and flat on the bottom made it easy to lift level-ish.
Got it slid under the car and lifted onto my floor jack. Nice and flat on the bottom made it easy to lift level-ish.
0 2022/11/01 23:36:54
Just dropped center section into the housing. Still needed to do brake lines at this point.
Just dropped center section into the housing. Still needed to do brake lines at this point.
0 2022/11/01 23:36:34
0 2022/04/08 15:20:34
0 2022/04/08 15:17:29
This is what I see going thru that purple wire KOEO
This is what I see going thru that purple wire KOEO
0 2022/02/16 20:45:19
Hit all connections with a multimeter, no power at Red or Blue which is power for pumps.
Hit all connections with a multimeter, no power at Red or Blue which is power for pumps.
0 2022/02/16 20:45:10
Power at the grey wire thru the Rx harness at the round 7 position connector. Power was also the same reading directly from the trigger wire off the Holley harness KOEO
Power at the grey wire thru the Rx harness at the round 7 position connector. Power was also the same reading directly from the trigger wire off the Holley harness KOEO
0 2022/02/16 20:45:01
Solid battery connection also have that thin ground wire grounded on the coil brackets
Solid battery connection also have that thin ground wire grounded on the coil brackets
0 2022/02/16 20:44:45
Fuses new and not popped
Fuses new and not popped
0 2022/02/16 20:44:39
ground loops to supply power to each pump separately. Or use a hobbs switch
ground loops to supply power to each pump separately. Or use a hobbs switch
0 2022/02/16 20:44:27
Side showing orientation of 4 way and in-tank harness with pump ground. connector and in-tank harness match up with each other
Side showing orientation of 4 way and in-tank harness with pump ground. connector and in-tank harness match up with each other
0 2022/02/16 20:44:19